Rosewood Diesel Injector Sleeve Removal/Installation Package, Ford (1994-03) 7.3L Power Stroke (Tool, O-Rings, & Sleeves)
ISR73KIT
Tool kit to remove and install injector sleeves/cups without pulling engine heads for the 7.3L Power Stroke and Navistar T444E engines.
This Kit Comes with:
-Rosewood Injector Cup Sleeve Removal/Install Tool (See extended description below)
-8 Injector Cups/Sleeves
-8 Injector O-Ring Kits (Alliant Power)
Will also work on:
T444E
DT466
DT530
This Kit Comes with:
-Rosewood Injector Cup Sleeve Removal/Install Tool (See extended description below)
-8 Injector Cups/Sleeves
-8 Injector O-Ring Kits (Alliant Power)
Will also work on:
T444E
DT466
DT530
Pricing:
$355.00
Description
Rosewood Diesel tool kit to remove and install injector sleeves/cups without pulling engine heads for the 7.3L Power Stroke and Navistar T444E engines. These Sleeve Tools are 100% Made in the USA using USA materials!
The 7.3L Power Stroke injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and tend to split and fail. A common symptom is finding fuel in your cooling system. This happens because the fuel system typically operates at around 60 psi of pressure, whereas the coolant system operates at a much lower pressure so the fuel gets pumped into the coolant when the sleeve fails and cracks.
We offer these custom made tools to simplify the changing of the sleeves. By design, the tools are shorter than an injector so you can change the sleeves with the heads on the motor and the motor still in the truck since there is no slide hammer required like with some other sleeve tools. These tools are Black Oxide Solid Steel for long life. You can replace your sleeves as preventative maintenance now, or replace them later once you detect signs of failure.
The 7.3L Power Stroke injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and tend to split and fail. A common symptom is finding fuel in your cooling system. This happens because the fuel system typically operates at around 60 psi of pressure, whereas the coolant system operates at a much lower pressure so the fuel gets pumped into the coolant when the sleeve fails and cracks.
We offer these custom made tools to simplify the changing of the sleeves. By design, the tools are shorter than an injector so you can change the sleeves with the heads on the motor and the motor still in the truck since there is no slide hammer required like with some other sleeve tools. These tools are Black Oxide Solid Steel for long life. You can replace your sleeves as preventative maintenance now, or replace them later once you detect signs of failure.
Details
- ISR73KIT
- ISR73KIT
- 708744249142
- Rosewood Diesel Shop
- New
Categories
Shipping Information
- Item Requires Shipping
- 4.0 lbs.
- W9.0000” x H2.0000” x L7.0000”
- Free Shipping
Customer Reviews
Total Reviews (3)
You must login to post a review.
May We Suggest
Reviewed by: Billy06/03/2015 10:33PM
Product ownership: Less than 1 week
Not purchased from: KT PerformanceComments:
Best tool I've seen in a long time, made the job sooo easy was super easy to use both pieces, I work in a shop that does nothing but diesel all diesel's.
They have been taking heads off for years I asked if they had this tool and they said you have to take the heads off, so I told them about the on line videos. We ordered this tool and I demonstrated it to them and now they want to buy 2 lol . Keep up the good work and thank you guys sooooo much.
Reviewed by: sam01/04/2016 11:13PM
Product ownership: Less than 3 months
Purchased from: KT Performance
Comments:
when considering buying this tool consider what you would pay a mechanic to do it for you. recommend using the penny idea over the rag so you are sure to bottom out the head due to thickness of a small rag. tool was easy to use and pulled cup with ease without removing rocker arms! glad these guys are around. thanks rosewood!
Reviewed by: Robb10/30/2016 05:22PM
Product ownership: Less than 1 week
Purchased from: KT Performance
Comments:
This is the most simple tool to use. Well worth the price. Had all my cups out in 15 minutes.
Couldn't imagine trying it with and other tool!