South Bend HD Single Disc Clutch Kit, Dodge (1988-04) 5.9L Cummins 5 Speed NV4500 & 6-Speed, 425hp
13125-OK-HD
Heavy Duty 13" Single Disc Clutch Kit with Flywheel for 425hp / 900tq & 20k Tpwing Capacity.
This heavy duty 13" design clutch kit with an extra thick, extra wide premium Organic lining. Perfect for moderate tuning and heavy towing while maintaining smooth engagement.
Clutch Fits:
1988-2004 5.9L NV4500 or Getrag (5 speed)
1999-2000.5 5.9L NV5600 (6speed) with 235hp Non HO engine
The Dyna Max kit features a performance organic lining on a carcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disc failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12.25" clutches. South Bend has taken the 13" ETH Clutch and modified it to accept the 1.25" input shaft. By doing this, it enabled them to offer a disc center that is 2-3 times larger and stronger then can be provided in the 12.25" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 425 horsepower & 850 ft. lbs. of torque.
South Bend Clutch utilizes Cryogenic Processing to strengthen their clutch kits. Deep cryogenic treating is a one-time process that permanently and dramatically improves the performance and useful life of metals in these clutch kits.
This heavy duty 13" design clutch kit with an extra thick, extra wide premium Organic lining. Perfect for moderate tuning and heavy towing while maintaining smooth engagement.
Clutch Fits:
1988-2004 5.9L NV4500 or Getrag (5 speed)
1999-2000.5 5.9L NV5600 (6speed) with 235hp Non HO engine
The Dyna Max kit features a performance organic lining on a carcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disc failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12.25" clutches. South Bend has taken the 13" ETH Clutch and modified it to accept the 1.25" input shaft. By doing this, it enabled them to offer a disc center that is 2-3 times larger and stronger then can be provided in the 12.25" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 425 horsepower & 850 ft. lbs. of torque.
South Bend Clutch utilizes Cryogenic Processing to strengthen their clutch kits. Deep cryogenic treating is a one-time process that permanently and dramatically improves the performance and useful life of metals in these clutch kits.
Was:
$992.16
Sale:
$962.40
Save:
3%
Save:
$29.76
Description
Key Benefits:
-Less voids or imperfections in the metallic grain structure
-Significantly less micro cracks
-Significantly less warping caused by heat
-Better friction coefficient
-Increased microstructure surface area
-Increased wear resistance
-Increase wear consistency
-Relief of internal residual stress
-Springs will maintain compression longer
After cryogenically treating your disc springs, clutch plate and flywheel, the material will wear less and the plate load will hold up over time.
-Less voids or imperfections in the metallic grain structure
-Significantly less micro cracks
-Significantly less warping caused by heat
-Better friction coefficient
-Increased microstructure surface area
-Increased wear resistance
-Increase wear consistency
-Relief of internal residual stress
-Springs will maintain compression longer
After cryogenically treating your disc springs, clutch plate and flywheel, the material will wear less and the plate load will hold up over time.
Details
- 13125-OK-HD
- 13125-OK-HD
- South Bend Clutch
- New
Categories
Shipping Information
- Item Requires Shipping
- 106.0 lbs.
- W18.0000” x H9.0000” x L22.0000”
- Free Shipping
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!