Additional Images

Edge Products Evolution CTS3 Diesel Tuner & Monitor for Ford (1999-19) F-250/F-350 Power Stroke

85400-100
  • Four Power Stroke engines covered: One unit handles the 7.3L (1999-03), 6.0L (2003-07), 6.4L (2008-10) and 6.7L (2011-19) in Ford Super Duty trucks.
  • Fitment: Made for 1999-2019 Ford F-250/F-350 Super Duty Power Stroke diesel trucks.
  • Pre-loaded diesel tuning: Dyno-tested Economy, Tow, Daily Driving and Performance calibrations flash in through the OBD-II port.
  • 5-inch color touchscreen: Capacitive, auto-dimming display with swipe navigation and gauge layouts you set up the way you like.
  • Live engine data: Keep an eye on EGT, boost, transmission temperature and other parameters while you drive, with custom alerts.
  • Codes and DPF regen: Read and clear trouble codes, and command a manual DPF regeneration on trucks that have one.
  • Performance meter and logger: Run 0-60 and quarter-mile tests, get horsepower estimates and export recorded drive data.
  • Custom tune support: Holley lists this standard version as accepting custom tunes from CMR, and extra vehicle licenses can be added later.
  • Room to grow: Add EAS sensors for EGT, pressure and temperature, or an Edge backup camera. Wi-Fi updates keep the software current.
  • 50-state legal: Carries CARB E.O. D-802-13 (1994-2010) and D-802-5 (2011-2019) for use on emissions-controlled vehicles in all 50 states when used per Edge's application guide. Does not support removal of emissions equipment.
Was: $899.95
Sale: $799.95
Save: 11%
Save: $100.00

Qty:
Free Shipping

Description

The Edge Evolution CTS3 for Power Stroke is an in-cab tuner, digital gauge package and diagnostic tool in one unit, built for 1999-2019 Ford F-250 and F-350 Super Duty trucks with the 7.3L, 6.0L, 6.4L or 6.7L Power Stroke. It plugs into the OBD-II port, saves your stock calibration and flashes Edge's tuning into the factory computer, then stays on the dash as your gauge display.

Four pre-loaded calibrations are on board: Economy, Tow, Daily Driving and Performance. Edge calls the gains dyno-proven but doesn't publish horsepower or torque figures for this part, so we won't quote any. The monitor is a 5-inch full-color capacitive touchscreen with auto-dimming, custom MyStyle backgrounds, boot-to-gauge on key-up, 5-volt data logging inputs and a video input for a backup camera. You get the CTS3 unit, software and instruction manual. A carrying case and AC adapter are not included, and dash or pillar mounts are sold separately.

On a 6.7L pulling a fifth wheel, the Tow tune and a screen showing EGT and trans temp make long grades a lot less of a guessing game. On an older 7.3L or 6.0L work truck the monitor earns its spot even without the tuning, giving you boost, temps and code reading without a row of pillar gauges. Being able to start a manual DPF regen and clear a code before you head to the shop is handy on the later trucks too.

Install is plug-and-play: no tools, no wiring and no need to open the hood. It is 50-state legal under CARB E.O. D-802-13 for 1994-2010 trucks and D-802-5 for 2011-2019 trucks when used per Edge's application guide. The truck must keep its factory emissions equipment; this unit does not support removing it.

The CA Edition (85401-101) covers the same trucks under the same E.O.s, but Holley lists it as not accepting CMR custom tunes, so this standard version is the better pick if a custom calibration is ever in the plan. Edge also offers the Evolution CTS4 Diesel (85500) with a larger 5.5-inch screen, though it has no CARB E.O. yet.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Video

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W6.2500” x H4.0000” x L9.5000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.