Additional Images

Edge Products Revolver Kit w/ Insight CTS3 for Ford (1995-03) F-250/F-350 & (00-03) Excursion, 7.3L Power Stroke (Blank)

14100-3
  • Blank Revolver: The chip in this kit has no tunes loaded. A Revolver Chip Burner or an Edge Revolver dealer is needed to load the calibration for your PCM code.
  • Fitment: For 1995-1997 and 1999-2003 Ford F-250/F-350 and 2000-2003 Excursion 7.3L Power Stroke trucks once burned for the correct box code.
  • Kit contents: Revolver chip, Insight CTS3 monitor and EAS Revolver cable.
  • Touchscreen level control: The CTS3 reads the Revolver through the EAS cable and shows a power level screen with up/down buttons.
  • Up to 140 HP and 250 lb-ft: Edge's rating for Revolver calibrations, varying by model year and level.
  • Digital gauges: Color touchscreen with auto dimming and custom MyStyle backgrounds.
  • Performance meter: Times 0-60 and quarter-mile runs.
  • Diagnostics: Read and clear trouble codes from the monitor.
  • Expandable: 5-volt data logging inputs and video capability for an optional backup camera.
  • 50-state legal: Carries CARB E.O. D-541-18, so it is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per Edge's application guide.
Was: $1,012.95
Sale: $899.95
Save: 11%
Save: $113.00

Qty:
Free Shipping

Description

The blank Edge Revolver Kit w/ Insight CTS3 is built for 1995-1997 and 1999-2003 Ford F-250/F-350 and 2000-2003 Excursion 7.3L Power Stroke trucks. It pairs a blank six-position Revolver chip with the Insight CTS3 touchscreen, so power levels are selected and engine data is displayed on one screen. The chip arrives without a calibration and must be loaded for the truck's PCM code first.

Included are the Revolver chip, Insight CTS3 and EAS Revolver cable. Edge rates the Revolver at up to 140 HP and 250 lb-ft depending on model year. The CTS3 brings a color touchscreen with auto dimming and custom backgrounds, a 0-60 and quarter-mile performance meter, trouble code read and clear, 5-volt data logging inputs and video capability. The Revolver Chip Burner and an EGT probe are not included.

This part number exists mainly for shops: keep one kit on the shelf and burn the right tune for whichever 7.3L shows up. Owners who don't have a burner or a Revolver dealer nearby are better served by the box-code kit for their truck, which comes loaded.

Disconnect both batteries before installing the chip, then clean the PCM terminal contacts and plug the Revolver in. 1995-1997 trucks are accessed behind the driver kick panel; 1998-2003 trucks require removing the PCM. Route the EAS Revolver cable to the CTS3 to enable level control. Legal in all 50 states under CARB E.O. D-541-18 with Edge calibrations installed per Edge's application guide.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Video

https://youtu.be/yinX8WdcbPo

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W6.0000” x H4.0000” x L9.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.