Edge Products Revolver Kit w/ Insight CTS3 for Ford (1999) F-250/F-350 7.3L Power Stroke (Early 1999 Auto - XLE7)
- Fitment: Made for early 1999 Ford F-250/F-350 7.3L Power Stroke trucks with an automatic transmission.
- Box code XLE7: Supports PCM codes FUT, GLF, HPA and XLE. Match the code on your PCM before ordering.
- What is in the kit: Revolver chip, Insight CTS3 monitor and the EAS Revolver cable that links the two.
- Levels from the touchscreen: With the EAS Revolver cable installed, the CTS3 shows a power level screen with up/down buttons and your current level.
- Up to 140 HP and 250 lb-ft: Edge's rating for the Revolver, with gains varying by model year and level.
- Digital gauges: Color touchscreen with auto dimming and custom MyStyle backgrounds for in-cab monitoring.
- Performance meter: Built-in timer for 0-60 and quarter-mile runs.
- Diagnostics: Read and clear trouble codes from the monitor.
- Room to grow: The CTS3 has 5-volt data logging inputs and is video capable for an optional backup camera.
- Emissions legal: Carries CARB E.O. D-541-18, so it is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per Edge's application guide.
Description
The Edge Revolver Kit w/ Insight CTS3 gives the early 1999 Ford F-250/F-350 7.3L Power Stroke six selectable power levels controlled from a color touchscreen. The chip in this kit is matched to master box code XLE7 (automatic transmission).
Master box code XLE7 covers PCM codes FUT, GLF, HPA and XLE. The kit includes the Revolver chip, the Insight CTS3 and the EAS Revolver cable. Edge rates the Revolver at up to 140 HP and 250 lb-ft, depending on model year, with throttle response, turbo spool-up and drivability improved along with fueling. The CTS3 adds a color touchscreen with auto dimming, custom backgrounds, a performance meter, trouble code read and clear, 5-volt data logging inputs and video capability. An EGT probe is not part of this kit; Edge sells it separately as an EAS add-on.
Super Duty automatics tend to tow hard, and this setup suits that. Choose a mild level for the fifth wheel or gooseneck, bump it up for empty highway miles, and keep the gauges you care about on screen the whole time.
Disconnect both batteries before installing the chip. On 1998-2003 trucks the PCM comes out of the truck for the chip install. Clean the PCM terminal contacts, plug in the Revolver, then route the EAS Revolver cable to the Insight CTS3. Edge advises against adjusting settings while driving or stacking other performance devices with the Revolver. Legal in all 50 states under CARB E.O. D-541-18 when installed per Edge's application guide.
Already happy with a dash switch and no gauges? The chip-only version for this box code is Edge part 14003. The kit makes more sense if you want to see what the engine is doing while you choose a power level.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Video
Details
- 14103-3
- 14103-3
- 810009939238
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W6.0000” x H4.0000” x L9.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!