Additional Images

Edge Products Revolver Kit w/ Insight CTS3 for Ford (1999) F-250/F-350 7.3L Power Stroke (Early 1999 Manual - AWA4)

14104-3
  • Fitment: Made for early 1999 Ford F-250/F-350 7.3L Power Stroke trucks with a manual transmission.
  • Box code AWA4: Supports PCM codes AWA, BDT, CLB and DYK. Match the code on your PCM before ordering.
  • What is in the kit: Revolver chip, Insight CTS3 monitor and the EAS Revolver cable that links the two.
  • One-touch level changes: The CTS3 reads the Revolver through the EAS cable and gives you a power level screen with up/down adjustment.
  • Up to 140 HP and 250 lb-ft: Edge's rating for the Revolver, with gains varying by model year and level.
  • In-cab monitoring: Full digital gauges on a color touchscreen that auto dims at night and takes custom backgrounds.
  • Performance meter: Built-in timer for 0-60 and quarter-mile runs.
  • Diagnostics: Read and clear trouble codes from the monitor.
  • Room to grow: The CTS3 has 5-volt data logging inputs and is video capable for an optional backup camera.
  • Emissions legal: Carries CARB E.O. D-541-18, so it is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per Edge's application guide.
Was: $1,012.95
Sale: $899.95
Save: 11%
Save: $113.00

Qty:
Free Shipping

Description

This Edge Revolver Kit pairs the six-position Revolver chip with an Insight CTS3 touchscreen for the early 1999 Ford F-250/F-350 7.3L Power Stroke, master box code AWA4 (manual transmission). Instead of reaching for a rotary switch, you pick your power level on the CTS3 screen and get in-cab digital gauges at the same time.

Master box code AWA4 covers PCM codes AWA, BDT, CLB and DYK. The kit includes the Revolver chip, the Insight CTS3 and the EAS Revolver cable. Edge rates the Revolver at up to 140 HP and 250 lb-ft, depending on model year, with throttle response, turbo spool-up and drivability improved along with fueling. The CTS3 adds a color touchscreen with auto dimming, custom backgrounds, a performance meter, trouble code read and clear, 5-volt data logging inputs and video capability. An EGT probe is not part of this kit; Edge sells it separately as an EAS add-on.

Manual Super Duty trucks get worked, and having the level selector and gauges on one screen makes it easy to run conservative power under load and more when the truck is light. Keep the clutch in mind at the higher levels with weight behind you.

Disconnect both batteries before installing the chip. On 1998-2003 trucks the PCM comes out of the truck for the chip install. Clean the PCM terminal contacts, plug in the Revolver, then route the EAS Revolver cable to the Insight CTS3. Edge advises against adjusting settings while driving or stacking other performance devices with the Revolver. Legal in all 50 states under CARB E.O. D-541-18 when installed per Edge's application guide.

Already happy with a dash switch and no gauges? The chip-only version for this box code is Edge part 14004. The kit makes more sense if you want to see what the engine is doing while you choose a power level.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Video

https://youtu.be/yinX8WdcbPo

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W6.0000” x H4.0000” x L9.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.