Diamond T Torque Converter for Ford (2011-12) 6.7L Power Stroke stock horse power Triple Disk 8 Lug
FT11ST-8
These Torque Converters are built in the USA with the highest grade components and come with a lifetime non-transferable warranty for defects in material and workmanship under normal and proper use. They are designed to improve acceleration, pulling power, and efficiency of your vehicle to the max. Unlike other "mass produced" re-manufactured torque converters, Diamond T technicians keep all of the original parts together during the re-manufacturing process to assure a matched set of components. Other re-manufacturers disassemble hundreds of torque converters and mix all of the parts in large bins. Keeping the parts together results in improved quality. All parts are inspected thoroughly and any marginal parts are replaced. They take the TIME to build quality into each and every Torque Converter. Many other companies do not measure the thickness of the housing and when they machine the surface it makes the metal too thin and leads to early failure. If your housing is less than the OEM specs, they replace it with a new one. The torque converters are precision balanced with a computerized balancer. Only the best clutch materials are used. The torque converters are pre-charged with transmission fluid. This helps to prevent rust on the internal components leading to early failure in case it is exposed to any humidity before installation. Quality testing is performed on each and every Torque Converter before it leaves the facility.
Torque Converter Information:
-Triple Disk
-"FORGED ON THE INSIDE" with Smart-Tech® Converter Clutch
-Triple Bearing
-8 Lug Cover
-Heavy Duty Design
-Lifetime Warranty!
***You will need to check the converter you are pulling out to make sure it is the 8 lug and not the 6 lug design.
Torque Converter Information:
-Triple Disk
-"FORGED ON THE INSIDE" with Smart-Tech® Converter Clutch
-Triple Bearing
-8 Lug Cover
-Heavy Duty Design
-Lifetime Warranty!
***You will need to check the converter you are pulling out to make sure it is the 8 lug and not the 6 lug design.
Was:
$995.00
Sale:
$829.99
Save:
17%
Save:
$165.01
Description
This warranty will be null and void if repair or replacement is required because of improper installation, accident, physical and, or, neglect, misuse or any other cause other than the ordinary and intended use for which the Product was designed, or if the Product has been dismantled, altered and, or, repaired by the customer or any third party.
Upgraded Smart-Tech® Converter Clutch Info:
Captive clutch failure in the Ford 6R140 is a chronic problem that is difficult to address with stock components or traditional methods. The Sonnax Smart-Tech converter clutch kit’s upgraded components significantly improve 6R140 durability.
Unlike most lockup converters, the 6R140 clutch does not engage the front cover — it moves away from the engine block and engages a stamped, steel backing plate, which is relatively thin and prone to flex.
Another weak point is the OE clutch, which is held together by a set of small, weak leaf springs. These springs are often broken or on the verge of breaking, causing the OE steel clutch plates to break loose and gouge the cover splines. Clutch failure occurs when damage and debris become severe, a particularly frequent issue in heavy-duty trucks that put massive stress on converter components.
• High-quality, forged components guarantee better TCC durability and fitment than stock parts
• Rigid backing plate with integrated clutch plate reduces flex and provides a more durable clutch reaction surface than the OE
• Custom coil springs and retainer pins ensure quiet, rattle-free performance
• Extends working height of the front cover lip, minimizing the need to weld a renewal ring to the impeller
• Contains OE friction clutch plate
Upgraded Smart-Tech® Converter Clutch Info:
Captive clutch failure in the Ford 6R140 is a chronic problem that is difficult to address with stock components or traditional methods. The Sonnax Smart-Tech converter clutch kit’s upgraded components significantly improve 6R140 durability.
Unlike most lockup converters, the 6R140 clutch does not engage the front cover — it moves away from the engine block and engages a stamped, steel backing plate, which is relatively thin and prone to flex.
Another weak point is the OE clutch, which is held together by a set of small, weak leaf springs. These springs are often broken or on the verge of breaking, causing the OE steel clutch plates to break loose and gouge the cover splines. Clutch failure occurs when damage and debris become severe, a particularly frequent issue in heavy-duty trucks that put massive stress on converter components.
• High-quality, forged components guarantee better TCC durability and fitment than stock parts
• Rigid backing plate with integrated clutch plate reduces flex and provides a more durable clutch reaction surface than the OE
• Custom coil springs and retainer pins ensure quiet, rattle-free performance
• Extends working height of the front cover lip, minimizing the need to weld a renewal ring to the impeller
• Contains OE friction clutch plate
Details
- FT11ST-8
- FT11ST-8
- 708744248787
- Diamond T Enterprises
- New
Shipping Information
- Item Requires Shipping
- 75.0 lbs.
- W13.0000” x H9.0000” x L13.0000”
- Free Shipping
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!