KT Performance » 2007, Chevy/GMC, 3500, Gas

This fits:
Chevy Silverado/GMC Sierra (2007-12) Crew Cab 1500/3500 HD Gas Engines
Chevy Silverado/GMC Sierra (2007-12) Extended Cab 1500/3500 HD Gas Engines

This fits:
Chevy/GMC Silverado/Sierra/Denali (1999-07) Crew Cab 1500/3500 HD Gas Engines
Chevy/GMC Silverado/Sierra/Denali (1999-07) Extended Cab 1500/3500 HD Gas Engines

2006+ GM Truck 2WD w/ 8.1L Gas Engine Stage 1 Automatic Transmission Package.
Includes:
- ATS Built Allison LCT1000 Auto Trans
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan

2006+ GM Truck 4WD w/ 8.1L Gas Engine Stage 1 Automatic Transmission Package.
Includes:
- ATS Built Allison LCT1000 Auto Trans
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan

2006+ GM Truck 2WD (w/ 8.1L Gas Engine) Stage 2 Automatic Transmission Package.
Includes:
- ATS Built Allison LCT1000 Automatic Transmission
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan
- ATS CoPilot Electronic Transmission Controller

2006+ GM Truck 4WD (w/ 8.1L Gas Engine) Stage 2 Automatic Transmission Package.
Includes:
- ATS Built Allison LCT1000 Automatic Transmission
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan
- ATS CoPilot Electronic Transmission Controller

2006+ GM w/ 8.1L Gas Engine 2wd 6-Speed LCT1000 Stage 4 Automatic Transmission Package.
Includes:
- ATS * EXTREME * LCT1000 6-Speed Transmission w/ Numerous Proprietary Components and Modifications
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan
- ATS CoPilot Electronic Transmission Controller
- ATS Billet Flex Plate
- Ability to hold 1000+ horsepower.

2006+ GM w/ 8.1L Gas Engine 4wd 6-Speed LCT1000 Stage 4 Automatic Transmission Package.
Includes:
- ATS * EXTREME * LCT1000 6-Speed Transmission w/ Numerous Proprietary Components and Modifications
- ATS Five Star Viskus Clutch Drive Torque Converter
- ATS Extra Deep Transmission Pan
- ATS CoPilot Electronic Transmission Controller
- ATS Billet Flex Plate
- Ability to hold 1000+ horsepower.

1030606-5/8 Fits:
Chevy - Allison 1000 Transmission, 2001-2010 Gas & Diesel

Step 1: Remove your factory wheel assembly.
-Loosen and remove factory lug nuts.
-Remove existing wheel and tire assembly

Step 2: Attach the adapter to the factory 8 lug hub assembly
-Please note front and rear adapters are different confirm before installation.
-Adapters must fit flat against the vehicle's hubs. Remove any rust and dirt from the hubs of brake rotors and drums. Remove any temporary retaining devices, like stud clips, they may interfere with the flush fitment of your adapters against the brake hubs.
-Using the factory flat washer lug nuts, use an air gun or torque wrench to torque the factory flat washer lug nuts to 140lbs on to the adapter. -After tightening all 8 factory lug nuts to the adapter, inspect the installation.
-Make sure the adapter is sitting secure and flush with the hub of the truck.

Step 3: Install your 10 lug wheel
-Attach the 10 lug wheel to the adapter and slide it on to the large hub of the adapter.
-Using an air gun or torque wrench, torque the large 10 bolt lug nuts to the wheel.
-After tightening all 10 large lug nuts to the wheel, inspect the installation.
-Make sure the wheel is sitting secure and flush with the hub of the adapter.

TERMS AND CONDITIONS OF WARRANTY

The warranty form must be filed within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.

We will not pay for any labor or consequential damages or materials, which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. No other warranty is hereby given or implied. We do not accept or assume any liability from damages resulting from errors, changes or improper installation of its products.


To File A Claim:
Please call for a return Authorization. Original receipt and warranty registration number will be required for the authorization.
Addition information if applicable: A detailed description of the problem, High quality digital photo, Runout specifications or Vehicle mileage.

If A Claim Is Filed:
The product has to be returned to us for inspection at the customer's expense (Shipping is not covered under the warranty). The product is inspected for claimed defect, and if the condition of product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.


We guarantee our pads to be free of defects from workmanship and materials for the life of the pad. This would include missing parts, broken or loose clips, etc. This warranty does not apply to normal wear, noise, or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. Diamond T Enterprises does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will we be liable for incident or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other losses that may be incurred. The warranty registration must be filed within 30 days of purchase. If you have a return for warranty, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. All valid warranty claims will be replaced with Street Plus brake pads.

WARRANTY DOES NOT COVER THE FOLLOWING
1. Pads worn out do to normal wear.
2. Problems caused by other factors such as a faulty caliper, worn out hardware.
3. Damage caused by excessive overheating.
4. Off road, commercial and racing applications.
5. Improper installation, modification, or product abuse.
6. Shipping Charges.

TERMS AND CONDITIONS OF WARRANTY

The warranty form must be filed within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.

We will not pay for any labor or consequential damages or materials, which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. No other warranty is hereby given or implied. We do not accept or assume any liability from damages resulting from errors, changes or improper installation of its products.


To File A Claim:
Please call for a return Authorization. Original receipt and warranty registration number will be required for the authorization.
Addition information if applicable: A detailed description of the problem, High quality digital photo, Runout specifications or Vehicle mileage.

If A Claim Is Filed:
The product has to be returned to us for inspection at the customer's expense (Shipping is not covered under the warranty). The product is inspected for claimed defect, and if the condition of product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.

Rotor Warranty
Rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.
* The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.


WARRANTY DOES NOT COVER THE FOLLOWING
1. Brake noise or squealing.
2. Rotors worn to minimum thickness.
3. Pulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.
4. Damage caused by excessive overheating (Bluing) of the rotors
5. Off road, commercial and racing applications.
6. Improper installation, modification, or product abuse.
7. Shipping Charges.

TERMS AND CONDITIONS OF WARRANTY

The warranty form must be filed within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.

We will not pay for any labor or consequential damages or materials, which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. No other warranty is hereby given or implied. We do not accept or assume any liability from damages resulting from errors, changes or improper installation of its products.


To File A Claim:
Please call for a return Authorization. Original receipt and warranty registration number will be required for the authorization.
Addition information if applicable: A detailed description of the problem, High quality digital photo, Runout specifications or Vehicle mileage.

If A Claim Is Filed:
The product has to be returned to us for inspection at the customer's expense (Shipping is not covered under the warranty). The product is inspected for claimed defect, and if the condition of product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.

Rotor Warranty
Rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.
* The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.


WARRANTY DOES NOT COVER THE FOLLOWING
1. Brake noise or squealing.
2. Rotors worn to minimum thickness.
3. Pulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.
4. Damage caused by excessive overheating (Bluing) of the rotors
5. Off road, commercial and racing applications.
6. Improper installation, modification, or product abuse.
7. Shipping Charges.

This warranty will be null and void if repair or replacement is required because of improper installation, accident, physical and, or, neglect, misuse or any other cause other than the ordinary and intended use for which the Product was designed, or if the Product has been dismantled, altered and, or, repaired by the customer or any third party.

This warranty will be null and void if repair or replacement is required because of improper installation, accident, physical and, or, neglect, misuse or any other cause other than the ordinary and intended use for which the Product was designed, or if the Product has been dismantled, altered and, or, repaired by the customer or any third party.

With the lifetime warranty that comes with our stainless products, they will outlast the life of your truck.

With the lifetime warranty that comes with our stainless products, they will outlast the life of your truck.

With the lifetime warranty that comes with our stainless products, they will outlast the life of your truck.

With the lifetime warranty that comes with our Endurance Truck Accessories stainless products, they will outlast the life of your truck.

With the lifetime warranty that comes with our Endurance Truck Accessories stainless products, they will outlast the life of your truck.

These head studs have a much higher strength and will not stretch like the factory bolts will. This will help keep your truck from popping head gaskets. These Gator Fasteners Performance Head Studs are a Heavy Duty stud designed for stock to moderately built Duramax engines.

Fitment:
• 4.8L 294ci (2004-17) small block Gen III/IV (LS-based engines)
• 5.3L 325ci (2004-14) small block Gen III/IV (LS-based engines)
• 5.7L 350ci (2004-07) small block Gen III/IV (LS-based engines)
• 6.0L 364ci (2004-20) small block Gen III/IV (LS-based engines)
• 6.2L 376ci (2008-17) small block Gen III/IV (LS-based engines)
• 7.0L 427ci (2006-15) small block Gen III/IV (LS-based engines)

FAQ - Transfer Case Pump Upgrade Kit

-What do I do with the OEM anti rattle clip when installing this upgrade?
You can discard the factory clip during installation of this kit. Its been designed to work with the clip removed.


-What other parts will I need to install this upgrade kit?
We tried to make the kit all inclusive for a basic installation. This is taking into consideration of course that its being installed as preventative measures. If its being installed as part of a repair or after pump rub has occured, there is no real way to know the extent of the damage inside the case until it is torn down. Most times, as long as the case has not run out of fluid, it can usually be repaired with a new rear housing and seal and prevented from ever happening again using the upgrade kit. Regardless of the reason for installing this upgrade, you will need to refill the transfer case with oil. We recommend our Royal Purple or Amsoil Transfer Case Oil for use in ALL transfer cases.

Features:
Solid 304 SS. Replaces the stock center link for added strength in the steering system
Comes with puller to remove stock centerlink
This is for racing and or offroad use only

Features:
Solid 304 SS. 1999-2010 GM full size truck, & SUV including H1 Hummer.
These are for racing and or offroad use only.
Tie rod sleeves now made to fit both OEM and NAPA tie rods.

Features:
- Solid 304 SS.
- Replaces OEM lock nut
- Tie rod sleeves now made to fit both OEM and NAPA tie rods.

Features:
- Solid 304 SS.
- Replaces OEM lock nut
- Tie rod sleeves now made to fit both OEM and NAPA tie rods.

Cadillac
-Escalade 5.3L, 5.7, & 6.0L (1999-05)

Chevrolet
-Full-size Trucks / Vans (gas) 4.3L, 5.0L, 5.7L, & 7.4L (1998-00)
-Full-size Trucks / Vans (gas) 4.8L, 5.3L, 6.0L, & 8.1L (1999-07)
-S10 4.3L (1998-04)
-Blazer 4.3L (1998-04)
-Corvette 5.7L (1999-04)
-Camaro 5.7L (1999-02)

GMC
-Denali 5.7L, 6.0L (1999-05)
-Full-size Trucks / Vans (gas) 4.3L, 5.0L, 5.7L, & 7.4L (1998-00)
-Full-size Trucks / Vans (gas) 4.8L, 5.3L, 6.0L, & 8.1L (1999-07)
-Sonoma 4.3L (1998-04)
-Jimmy 4.3L (1998-04)

Hummer
-H2 6.0L (2003-05)

Pontiac
-Firebird 5.7L (1999-02)
-GTO 5.7L (2004)
-Trans Am 5.7L (1999-02)