Additional Images

Edge Products Pulsar V3 + Insight CTS4 Kit for Chevy/GMC (2020-23) 2500/3500 6.6L L5P Duramax

22601-4
  • Up to +135 HP and +290 lb-ft: Five on-the-fly levels: +35/+70, +50/+120, +75/+165, +95/+220 and +135 HP/+290 lb-ft.
  • 2020-2023 L5P fitment: For 2020-2023 Chevy Silverado and GMC Sierra 2500HD/3500HD 6.6L L5P Duramax trucks.
  • Change power with a button: Switch between levels while driving, without reflashing the ECM.
  • Safety backdowns: Transmission Slip Protection, adjustable EGT Backdown, Cold Engine Backdown and Shift Backdown help manage the added power.
  • Adjustable throttle sensitivity: Set pedal response anywhere from mild to aggressive.
  • High idle from 700 to 1,500 RPM: Adjust supported idle speed through the system.
  • Plug-and-play inline module: No cutting, splicing or permanent wiring changes, and the factory ECM calibration stays in place.
  • CTS4 monitor with Wi-Fi updates: 5.5-inch touchscreen with custom gauges and backgrounds, alerts, logging and code read/clear.
  • Re-geared trucks: Changing ring-and-pinion gears disables GM factory cruise control. Pulsar can correct the speedometer but cannot restore cruise.
  • Not for California: Not legal for sale or use in California while CARB testing is pending (no E.O. number yet). Legal in states that follow the EPA Tampering Policy.
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to California, Colorado or New York
Was: $1,799.95
Sale: $1,599.95
Save: 11%
Save: $200.00

Qty:
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to California, Colorado or New York
Free Shipping

Description

The Edge Pulsar V3 with CTS4 kit is an inline performance module and digital monitor for 2020-2023 Chevy Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks with the 6.6L L5P Duramax.

Pulsar V3 gives you five levels you can change on the fly: +35 HP/+70 lb-ft, +50/+120, +75/+165, +95/+220 and +135 HP/+290 lb-ft. Adjustable throttle sensitivity sharpens the pedal, and high idle can be set from 700 to 1,500 RPM. Safety features include Transmission Slip Protection, adjustable EGT Backdown, Cold Engine Backdown and Shift Backdown. The CTS4 monitor runs a 5.5-inch high-res touchscreen with a 1.7GHz dual-core processor, 60 FPS gauge refresh and built-in Wi-Fi updates.

Pulsar is a good fit for L5P owners who tow heavy and want more power without reflashing the ECM, but still want backdowns watching EGT and transmission slip. Drop to a low level for daily driving and step up when you hook up the trailer. The CTS4 shows engine, drivetrain, temperature, pressure and emissions-system data, so you can watch what the truck is doing on a long pull.

Pulsar V3 works alongside the factory electronics with no cutting, splicing or permanent wiring changes, and the factory ECM calibration stays in place. If you change ring-and-pinion gears on a late-model GM truck, factory cruise control is disabled. Pulsar can correct the speedometer for the new gears but cannot re-enable cruise; that takes full ECM tuning. Not legal for sale or use in California. CARB testing is pending and no E.O. number has been issued yet; Edge lists it as legal in states that accept the EPA Tampering Policy dated November 23, 2020.

Add compatible EAS sensors to the CTS4 later. Coming from a CTS3, you get 21% more screen area and 3.4x the processing power.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 5.2 lbs.
  • W10.0000” x H4.0000” x L12.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.