Edge Products Revolver Kit w/ Insight CTS3 for Ford (1994.5-97) F-250/F-350 7.3L Power Stroke (Auto - TDE1)
- Fitment: Made for 1994.5-1997 Ford F-250/F-350 7.3L Power Stroke trucks with an automatic transmission.
- Box code TDE1: Supports PCM codes LKM, MIF, NAW, PRE, PRY, TDE, TEE, YBT and ZAA. Match the code on your PCM before ordering.
- What is in the kit: Revolver chip, Insight CTS3 monitor and the EAS Revolver cable that links the two.
- Levels from the touchscreen: With the EAS Revolver cable installed, the CTS3 shows a power level screen with up/down buttons and your current level.
- Up to 140 HP and 250 lb-ft: Edge's rating for the Revolver, with gains varying by model year and level.
- Digital gauges: Color touchscreen with auto dimming and custom MyStyle backgrounds for in-cab monitoring.
- Performance meter: Built-in timer for 0-60 and quarter-mile runs.
- Diagnostics: Read and clear trouble codes from the monitor.
- Room to grow: The CTS3 has 5-volt data logging inputs and is video capable for an optional backup camera.
- Emissions legal: Carries CARB E.O. D-541-18, so it is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per Edge's application guide.
Description
This Edge Revolver Kit pairs the six-position Revolver chip with an Insight CTS3 touchscreen for the 1994.5-1997 Ford F-250/F-350 7.3L Power Stroke, master box code TDE1 (automatic transmission). Instead of reaching for a rotary switch, you pick your power level on the CTS3 screen and get in-cab digital gauges at the same time.
Master box code TDE1 covers PCM codes LKM, MIF, NAW, PRE, PRY, TDE, TEE, YBT and ZAA. The kit includes the Revolver chip, the Insight CTS3 and the EAS Revolver cable. Edge rates the Revolver at up to 140 HP and 250 lb-ft, depending on model year, with throttle response, turbo spool-up and drivability improved along with fueling. The CTS3 adds a color touchscreen with auto dimming, custom backgrounds, a performance meter, trouble code read and clear, 5-volt data logging inputs and video capability. An EGT probe is not part of this kit; Edge sells it separately as an EAS add-on.
For an OBS 7.3L automatic that tows, the CTS3 gives you something the factory cluster never did: real gauges in front of you while you pick a power level to match the load. Run a low position with the trailer hooked up, step up when the truck is empty, and watch the numbers instead of guessing.
Disconnect both batteries before installing the chip. On 1995-1997 trucks the PCM is behind the driver kick panel and emergency brake bracket. Clean the PCM terminal contacts, plug in the Revolver, then route the EAS Revolver cable to the Insight CTS3. Edge advises against adjusting settings while driving or stacking other performance devices with the Revolver. Legal in all 50 states under CARB E.O. D-541-18 when installed per Edge's application guide.
Already happy with a dash switch and no gauges? The chip-only version for this box code is Edge part 14001. The kit makes more sense if you want to see what the engine is doing while you choose a power level.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Video
Details
- 14101-3
- 14101-3
- 810009939214
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W6.0000” x H4.0000” x L9.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!