Additional Images

Edge Products Revolver Kit w/ Insight CTS3 for Ford (1994.5-97) F-250/F-350 7.3L Power Stroke (Manual - MLE1)

14102-3
  • Fitment: Made for 1994.5-1997 Ford F-250/F-350 7.3L Power Stroke trucks with a manual transmission.
  • Box code MLE1: Supports PCM codes ALF, AUG, BEG, GOB, MLE and SOD. Match the code on your PCM before ordering.
  • What is in the kit: Revolver chip, Insight CTS3 monitor and the EAS Revolver cable that links the two.
  • One-touch level changes: The CTS3 reads the Revolver through the EAS cable and gives you a power level screen with up/down adjustment.
  • In-cab monitoring: Full digital gauges on a color touchscreen that auto dims at night and takes custom backgrounds.
  • Up to 140 HP and 250 lb-ft: Edge's rating for the Revolver, with gains varying by model year and level.
  • Performance meter: Built-in timer for 0-60 and quarter-mile runs.
  • Diagnostics: Read and clear trouble codes from the monitor.
  • Room to grow: The CTS3 has 5-volt data logging inputs and is video capable for an optional backup camera.
  • Emissions legal: Carries CARB E.O. D-541-18, so it is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per Edge's application guide.
Was: $1,012.95
Sale: $899.95
Save: 11%
Save: $113.00

Qty:
Free Shipping

Description

Built for the 1994.5-1997 Ford F-250/F-350 7.3L Power Stroke, this kit combines Edge's Revolver performance chip, tuned for master box code MLE1 (manual transmission), with the Insight CTS3 monitor. The CTS3 becomes your level selector and gauge display in one.

Master box code MLE1 covers PCM codes ALF, AUG, BEG, GOB, MLE and SOD. The kit includes the Revolver chip, the Insight CTS3 and the EAS Revolver cable. Edge rates the Revolver at up to 140 HP and 250 lb-ft, depending on model year, with throttle response, turbo spool-up and drivability improved along with fueling. The CTS3 adds a color touchscreen with auto dimming, custom backgrounds, a performance meter, trouble code read and clear, 5-volt data logging inputs and video capability. An EGT probe is not part of this kit; Edge sells it separately as an EAS add-on.

On a manual OBS 7.3L, the kit keeps the old truck simple to drive while adding power you can dial up or down from the screen. Use the gauges to keep tabs on the engine when you are working it, and remember the clutch has to hold whatever power you add.

Disconnect both batteries before installing the chip. On 1995-1997 trucks the PCM is behind the driver kick panel and emergency brake bracket. Clean the PCM terminal contacts, plug in the Revolver, then route the EAS Revolver cable to the Insight CTS3. Edge advises against adjusting settings while driving or stacking other performance devices with the Revolver. Legal in all 50 states under CARB E.O. D-541-18 when installed per Edge's application guide.

Already happy with a dash switch and no gauges? The chip-only version for this box code is Edge part 14002. The kit makes more sense if you want to see what the engine is doing while you choose a power level.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Video

https://youtu.be/yinX8WdcbPo

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W6.0000” x H4.0000” x L9.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.