Edge Products EAS Shift-On-The-Fly Accessory for Ford (2011-14) F-250/F-350 6.7L Power Stroke (Insight CTS3)
- Change custom tunes from the screen: Switch between custom tune levels on your Edge Insight monitor instead of a dash-mounted SOTF switch.
- Fitment: Made for 2011-2014 Ford F-250/F-350 6.7L Power Stroke trucks. F-450/F-550 are not listed.
- Monitor compatibility: Edge names the Insight CTS3 for this part. CS2, CTS2 and CTS4 are not listed on this part number.
- Five voltage steps: Switches between 1V, 2V, 3V, 4V and 5V signals, the range most switch-selectable custom tunes use.
- Where it connects: Plugs into the fuel temperature sensor and controls only tune levels that change voltage resistance through that sensor.
- No drilling the dash: Replaces the mechanical SOTF or driver-selectable tuning (DST) switch.
- Plug-and-play EAS accessory: Connects to your Insight through the Expandable Accessory System.
- Custom tunes only: Works only with a custom tune that has switch-selectable (SOTF/DST) levels flashed in. It does not add power or work with canned tunes on its own.
- Tuning disclaimer: Custom tunes from third-party tuners or tuning software are not affiliated with, approved or endorsed by Edge/Powerteq, and Edge is not liable for them.
Description
The Edge EAS Shift-On-The-Fly Accessory (98650) is built for 2011-2014 Ford F-250/F-350 trucks with the 6.7L Power Stroke. It lets an Edge Insight CTS3 switch the levels of a switch-selectable custom tune.
It works by sending one of five voltage signals, 1V through 5V, the same way a mechanical SOTF or DST switch does. On the 6.7L Power Stroke it plugs into the fuel temperature sensor and controls only tune levels that change voltage resistance through that sensor. Once your custom tune with SOTF/DST levels is flashed in, you pick the level on the Insight screen.
Many 6.7L custom tunes use the fuel temperature sensor input to select levels. This accessory gives you that selector on the Insight screen, so stepping down for a heavy trailer or back up when you're empty takes a tap instead of a dash switch.
This accessory only switches levels in a custom tune that is built for switch input. It does not contain a tune, add power by itself or work with canned tunes. Your tuner has to flash a tune with SOTF/DST enabled. Custom tunes from third-party tuners or tuning software are not affiliated with, approved or endorsed by Edge/Powerteq, and Edge is not liable for them. Check the emissions status of your custom tune for your state; the switch itself has no emissions function.
Edge makes a separate SOTF part for each platform because the connection point differs, so match the part number to your truck before ordering.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Video
Detail
Detail
Detail
Detail
Detail
Details
- 98650
- 98650
- 810115019978
- Edge Products
- New
Categories
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- W6.0000” x H3.0000” x L10.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!