Edge Products Pulsar V3 + Insight CTS3 Kit for Chevy/GMC (2020-23) 2500/3500 6.6L L5P Duramax
- Fitment: Built for 2020-2023 Chevy Silverado/GMC Sierra 2500HD/3500HD 6.6L L5P Duramax trucks.
- Power plus a screen: Pulsar V3 inline module paired with the Insight CTS3 5-inch color touchscreen monitor.
- On-the-fly levels: Change power at the touch of a button from the CTS3 or the steering wheel controls.
- Backdowns you control: Transmission slip protection on/off, adjustable EGT backdown, plus cold engine and shift backdowns you can enable or disable.
- Throttle and idle: Throttle sensitivity adjustment and high idle from 700-1500 RPM.
- Gauges your way: Highly customizable gauges and backgrounds, auto-dimming, and it boots straight to the gauge screen on key cycle.
- Diagnostics and logging: Read and clear trouble codes, full data monitoring and data logging.
- Wi-Fi updates and EAS: Wi-Fi updateable and compatible with Edge's Expandable Accessory System sensors.
- Not for California: Not legal for sale or use in California or on pollution-controlled vehicles in states that adopt California rules. Edge lists it as legal under the EPA's November 23, 2020 Tampering Policy in states that accept that policy; CARB testing is pending.
Description
This kit combines Edge's Pulsar V3 inline module with the Insight CTS3 monitor for 2020-2023 Chevy Silverado and GMC Sierra 2500HD/3500HD trucks with the 6.6L L5P Duramax. The Pulsar adds on-the-fly power at the ECM, and the CTS3 puts power level, backdowns and gauges on a 5-inch color touchscreen.
Edge rates the Pulsar V3 module at up to 136 HP and 293 lb-ft at the wheels. With the CTS3 connected you can turn transmission slip protection on or off, adjust the EGT backdown and throttle sensitivity, enable or disable the cold engine and shift backdowns, and set high idle from 700-1500 RPM. The monitor reads and clears codes, logs data, accepts Wi-Fi updates and works with Edge EAS accessories. The kit includes the Pulsar V3 module and the Insight CTS3 monitor.
This is the setup for a truck that works hard. Watch EGT and transmission data on the screen while you tow, set the backdowns where you want them, and pick a level that fits the load instead of living with one calibration.
The Pulsar plugs in at the ECM with no cutting or splicing and the CTS3 connects at the OBD-II port; follow Edge's Pulsar/Insight instructions. Edge notes that physically changing ring and pinion gears on these GM trucks disables the factory cruise control; the Pulsar can correct the speedometer for the new ratio but cannot turn cruise back on, since GM ties that to the engine calibration. Not legal for sale or use in California or on pollution-controlled vehicles in states that adopt California rules. Edge lists it as legal under the EPA's November 23, 2020 Tampering Policy in states that accept that policy; CARB testing is pending.
Edge also offers this pairing with the newer CTS4 monitor (22601-4) if you want the larger screen. For a 2020-2023 truck, the module-only Pulsar V3 (22401) is the lower-cost route if you don't need a monitor.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Video
Details
- 22601-3
- 22601-3
- 810065210791
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 8.0 lbs.
- W9.8000” x H4.0000” x L17.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!