Additional Images

Edge Products Pulsar V3 + Insight CTS4 Kit for Chevy/GMC (2017-19) 2500/3500 6.6L L5P Duramax

22602-4
  • Up to +130 HP and +295 lb-ft: Level 1 +30/+70, Level 2 +60/+125, Level 3 +80/+175, Level 4 +100/+240, Level 5 +130 HP/+295 lb-ft.
  • Early L5P fitment: Fits 2017-2019 Chevy Silverado and GMC Sierra 2500HD/3500HD 6.6L L5P Duramax trucks.
  • On-the-fly levels: Go up or down a level with the touch of a button, no reflash and no stopping.
  • Protection built in: Transmission Slip Protection, Cold Engine Backdown, Shift Backdown and an EGT Backdown you set yourself.
  • Throttle sensitivity: Adjust pedal feel to suit towing, daily driving or a more aggressive response.
  • Adjustable high idle: Set supported idle speed between 700 and 1,500 RPM.
  • Factory ECM calibration stays: Plug-and-play install with no cutting, splicing or permanent wiring changes.
  • 5.5-inch CTS4 display: Customizable gauges and backgrounds, alerts, data logging, code read/clear and Wi-Fi updates.
  • Gear change note: A ring-and-pinion swap on these GM trucks disables factory cruise. Pulsar fixes the speedometer reading but can't turn cruise back on.
  • Not for California: Not legal for sale or use in California while CARB testing is pending (no E.O. number yet). Legal in states that follow the EPA Tampering Policy.
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to California, Colorado or New York
Was: $1,799.95
Sale: $1,599.95
Save: 11%
Save: $200.00

Qty:
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to California, Colorado or New York
Free Shipping

Description

This Edge Pulsar V3 and CTS4 kit adds on-the-fly power and digital monitoring to 2017-2019 Chevy Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks with the 6.6L L5P Duramax.

The five levels for the 2017-2019 L5P are +30 HP/+70 lb-ft, +60/+125, +80/+175, +100/+240 and +130 HP/+295 lb-ft. Levels change at the touch of a button while you drive. Throttle sensitivity is adjustable, high idle can be set from 700 to 1,500 RPM, and the safety package covers Transmission Slip Protection, adjustable EGT Backdown, Cold Engine Backdown and Shift Backdown. The CTS4 has a 5.5-inch high-res touchscreen, 1.7GHz dual-core processor and 2GB of RAM, with Wi-Fi updates.

For an early L5P that pulls a camper or a loaded flatbed, Pulsar gives you real torque gains while the backdowns keep an eye on EGT and transmission slip. Keep it on a low level around town and step up for the trailer. If your truck still has a CTS3 or an older Insight, the CTS4 boots about 70% faster and switches PIDs 50% faster.

The Pulsar V3 connects to the factory electronics with no cutting, splicing or permanent wiring changes, and the factory ECM calibration is left alone. Physically changing ring-and-pinion gears on late-model GM trucks disables factory cruise control. Pulsar can recalibrate the speedometer for the new ratio but cannot restore cruise, which requires full ECM tuning. Not legal for sale or use in California. CARB testing is pending and no E.O. number has been issued yet; Edge lists it as legal in states that accept the EPA Tampering Policy dated November 23, 2020.

Compatible EAS sensors can be added to the CTS4 for extra EGT, pressure or temperature readings.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 5.2 lbs.
  • W10.0000” x H4.0000” x L12.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.