Edge Products Evolution CTS3 Diesel Tuner & Monitor for Chevy/GMC (2020-23) 2500/3500 6.6L L5P Duramax (with Locksmith Unlock)
- Up to +125 HP and +275 lb-ft: Edge's Extreme level at peak RPM, with Edge testing showing up to 1.3 seconds and 8 MPH gained in the quarter-mile.
- Four levels: Economy (+50 HP/+100 lb-ft), Towing (+75/+160), Performance (+90/+180) and Extreme (+125/+275).
- Fitment: For 2020-2023 Chevy Silverado and GMC Sierra 2500/3500 6.6L L5P Duramax trucks.
- Allison 10-speed tuning: Shift calibrations for the 10-speed are part of the package.
- In-truck ECM/TCM unlock: The Edge Locksmith tool unlocks both modules through the OBD-II port. A PC with Edge's Update Agent software is required.
- One truck per kit: The device unlocks and tunes one vehicle. The unlock can't be reversed (the stock tune can be restored), and it is non-returnable once VIN-locked and unlocked.
- DPF-aware gauges: Soot level, miles since last regen, EGT, boost and fluid temps on the 5-inch touchscreen, plus manual regen.
- Duramax adjustments: Throttle Boost pedal sensitivity, 26-38 inch tire calibration, idle-up from 600 to 1,800 RPM, speed and rev limiters, Allison relearn.
- Remembers your settings: Drive mode, exhaust brake, Tow/Haul and grade braking choices carry over between starts.
- Not for California: Not legal for sale or use in California or on pollution-controlled vehicles in states that adopt California rules. CARB testing is pending.
- Cannot ship to California, Colorado or New York
Description
The Edge Evolution CTS3 with Locksmith is the tuner and monitor kit for 2020-2023 Chevy Silverado and GMC Sierra 2500/3500 trucks with the 6.6L L5P Duramax. These trucks need the ECM and TCM unlocked before they can be tuned, and the included Locksmith tool does that through the OBD-II port with the modules left in the truck.
Four calibrations are pre-loaded, rated at peak RPM: Economy at +50 HP/+100 lb-ft, Towing at +75/+160, Performance at +90/+180 and Extreme at +125 HP/+275 lb-ft. Edge's testing showed up to 1.3 seconds and 8 MPH gained in the quarter-mile. Allison 10-speed tuning is included. The CTS3 monitor shows soot, miles since the last regen, EGT, boost and fluid temperatures, reads and clears codes, commands a manual DPF regen and updates over Wi-Fi.
For a 2020-up HD that pulls a big fifth wheel or gooseneck, Towing is where most owners will live, and the 10-speed tuning helps the truck pick gears better under load. The settings memory is a nice touch: the truck keeps your exhaust brake, Tow/Haul, drive mode and grade braking choices instead of resetting every start. Idle-up, tire size correction and an Allison relearn round it out.
A PC and Edge's downloadable Update Agent software are needed to finish tuning. Use a battery charger during the unlock; a voltage drop mid-unlock can leave the ECM inoperable. The device unlocks and tunes one vehicle only. The unlock can't be reversed, though the factory calibration can be restored, and once the VIN lock and ECM unlock are complete the kit is non-returnable. The calibrations keep the factory emissions equipment and the CTS3 does not support removing it. Not legal for sale or use in California or in states that adopt California rules; CARB testing is pending.
Edge also makes an Evolution CTS4 version for these trucks (85500-261) with a larger 5.5-inch screen. For 2017-2019 L5P trucks, see the CTS3 kit 85400-262.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Details
- 85400-261
- 85400-261
- 810065212412
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W7.2500” x H7.2500” x L13.2500”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!