Sky's Off-Road Design Crossover Steering Conversion Kit for Ford (1992-97) F-250/F-350 & (99-04) with Dana 60 Ball Joint Axle

What it is designed for:
1992-97 F-250/350 Trucks
1992-04 Ford Dana 60 Ball Joint Axle

Please Note:
• Your knuckles are machined and in and returned to you. There are multiple brake caliper mounts that require you to send the knuckles from your truck. Knuckle machining runs in a batch process, they do not machine knuckles one at a time. Once Sky Manufacturing receives your knuckle, They will machine it in less than 2 weeks and have your kit shipped back to you.
• Minimum lift required is 4 inch's unless you want to notch your frame.
• You will need 1.5" taller arms if your leaf packs 3.75" or thicker.
• Kit will correct for a 7" lift with stock pitman arm. This puts the drag link at almost parallel to the axle, within reason you can do up to a 10 inch lift with no drop pitman arm, however we recommend a 4" drop pitman arm over 8" of lift.
• Do not send in knuckles that have already been machined or welded on.
• If you order a steering kit with other parts, we will not ship the additional parts without your knuckle due to shipping cost factored as a complete order and inventory issues.

Steering Arm Info:
• Machined out of ASTM A572 Grade 50 steel.
• Grade 50 is a very strong low allow steel that fulfills our exceptionally high strength requirements, and is particularly strong for applications in which it is riveted or bolted.
• ASTM A572 Grade 50 is considered a "workhorse" grade and is widely used in many applications.
• Steel mills produce channel and heavy beams with Grade 50. It is commonly used in structural applications, heavy construction equipment, building structures, heavy duty anchoring systems, boom sections, structural steel shapes, and applications that require high strength per weight ratio.
• Tensile strength: 65,000 psi
• Yield strength: 50,000 psi
• Made in the USA!