Dieselsite Wicked Wheel 2 Performance Compressor Wheel, Chevy/GMC (2004.5-05) 6.6L LLY Duramax, Stock Turbo
WWLLY
FOR STOCK TURBO APPLICATIONS FROM 2004.5-2005
• New Design
• Lower EGT's
• Faster Spool
• Increased Boost
• Greatly Improves Throttle Response
• Machined billet aluminum
• Improved Power and Performance
Important tip:
It is a left hand thread (reverse thread), meaning you turn the nut to the right to loosen. The Wicked Wheel is balanced at the Factory. Turbo balancing after installation is not necessary.
Our goal with this project was to create a more efficient turbocharger. When we talk about a turbo's maximum recommended boost levels, we base that on the rpms the turbo needs to turn in order to create said boost. When you increase boost without increasing rpms or drive pressure, the load on the turbocharger is the same for the elevated boost as is was for the original lower boost number. The best part is when you run at lower pressures, like you would in daily driving conditions, the drive pressure/ boost pressure ratios are always lower, which should in turn result in longer turbo life, not less. ~ Bob Riley
While capable of high boost numbers with supporting mods these wheels are safe for stock turbo applications!
• New Design
• Lower EGT's
• Faster Spool
• Increased Boost
• Greatly Improves Throttle Response
• Machined billet aluminum
• Improved Power and Performance
Important tip:
It is a left hand thread (reverse thread), meaning you turn the nut to the right to loosen. The Wicked Wheel is balanced at the Factory. Turbo balancing after installation is not necessary.
Our goal with this project was to create a more efficient turbocharger. When we talk about a turbo's maximum recommended boost levels, we base that on the rpms the turbo needs to turn in order to create said boost. When you increase boost without increasing rpms or drive pressure, the load on the turbocharger is the same for the elevated boost as is was for the original lower boost number. The best part is when you run at lower pressures, like you would in daily driving conditions, the drive pressure/ boost pressure ratios are always lower, which should in turn result in longer turbo life, not less. ~ Bob Riley
While capable of high boost numbers with supporting mods these wheels are safe for stock turbo applications!
Pricing:
$259.00
Description
DO NOT USE AN IMPACT WRENCH TO CHANGE TURBO WHEELS! Impact wrenches cause stress fractures in the shaft that will cause failure either very soon or thousands of miles down the road. It's like a crack in your windshield that grows over time. Take your time and remove the turbo, hold onto the turbine shaft and remove the compressor wheel with an open end wrench.
Details
- WWLLY
- WWLLY
- DieselSite
- New
Categories
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- W5.0000” x H5.0000” x L5.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!