Diamond T Performance Brake Rotor Pair, Ford (1999-2004) F-250 & F-350 (00-05) Excursion (DTE-T54-078-P) Slotted, Zinc Plating (Front) 4x4
DTE-T54-078-P
Performance Slotted Brake Rotors will help you stay safe. Aggressive driving, stop and go traffic or driving down a steep mountain road can cause excessive heat. At higher braking temperatures brake pads start to expel gasses. These expanding gasses push the pads away from the rotor causing brake fade. Diamond T Enterprises Slotted Brake Rotors will live up to the challenge. The slots vent hot gasses that cause brake fade, allowing you to bring your vehicle to a screeching halt.
The series of slots also wipe dust away from the pads and improve bite. Wet weather braking is also improved by preventing hydroplaning between the pad and rotor. Diamond T Enterprises Performance Slotted Rotors provide a bolt-on, hassle free way to greatly improve your vehicles stopping performance without expensive modifications.
-Diamond T Enterprises Performance Brake Rotors are made in the USA!
-Zinc Plated Corrosion Resistant Finish provides long-lasting protection against corrosion even in the most hostile environments. Zinc Plating provides the highest level of protection.
-Directional Angled Slots help increase brake pad bite, improve air circulation and Cooling. The slots also reduce brake fade and stop brake hydroplaning in bad weather greatly improving braking efficiency and reducing Stopping Distances.
-Directional 1/2 Slot helps balance and stabilize friction level and optimizes brake pad contact.
-Diamond T rotors are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.
These Disc Brake Rotors fit the following application(s):
1999 - 2005 Ford Excursion 4 Wheel Drive - Front
1999 - 2004 Ford F-250 4WD Super Duty Single Rear Wheels , With ABS or 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
1999 - 2004 Ford F-350 4WD Super Duty Single Rear Wheels , With 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
1999 Ford F-350 4WD Super Duty Dual Rear Wheels , With 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
The series of slots also wipe dust away from the pads and improve bite. Wet weather braking is also improved by preventing hydroplaning between the pad and rotor. Diamond T Enterprises Performance Slotted Rotors provide a bolt-on, hassle free way to greatly improve your vehicles stopping performance without expensive modifications.
-Diamond T Enterprises Performance Brake Rotors are made in the USA!
-Zinc Plated Corrosion Resistant Finish provides long-lasting protection against corrosion even in the most hostile environments. Zinc Plating provides the highest level of protection.
-Directional Angled Slots help increase brake pad bite, improve air circulation and Cooling. The slots also reduce brake fade and stop brake hydroplaning in bad weather greatly improving braking efficiency and reducing Stopping Distances.
-Directional 1/2 Slot helps balance and stabilize friction level and optimizes brake pad contact.
-Diamond T rotors are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.
These Disc Brake Rotors fit the following application(s):
1999 - 2005 Ford Excursion 4 Wheel Drive - Front
1999 - 2004 Ford F-250 4WD Super Duty Single Rear Wheels , With ABS or 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
1999 - 2004 Ford F-350 4WD Super Duty Single Rear Wheels , With 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
1999 Ford F-350 4WD Super Duty Dual Rear Wheels , With 4 Wheel ABS, 3.73 4.10 4.30 Gear Ratio, 13 1/64" Rotors - Front
Was:
$315.15
Sale:
$252.12
Save:
20%
Save:
$63.03
Description
TERMS AND CONDITIONS OF WARRANTY
The warranty form must be filed within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.
We will not pay for any labor or consequential damages or materials, which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. No other warranty is hereby given or implied. We do not accept or assume any liability from damages resulting from errors, changes or improper installation of its products.
To File A Claim:
Please call for a return Authorization. Original receipt and warranty registration number will be required for the authorization.
Addition information if applicable: A detailed description of the problem, High quality digital photo, Runout specifications or Vehicle mileage.
If A Claim Is Filed:
The product has to be returned to us for inspection at the customer's expense (Shipping is not covered under the warranty). The product is inspected for claimed defect, and if the condition of product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.
Rotor Warranty
Rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.
* The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.
WARRANTY DOES NOT COVER THE FOLLOWING
1. Brake noise or squealing.
2. Rotors worn to minimum thickness.
3. Pulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.
4. Damage caused by excessive overheating (Bluing) of the rotors
5. Off road, commercial and racing applications.
6. Improper installation, modification, or product abuse.
7. Shipping Charges.
The warranty form must be filed within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturer's recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.
We will not pay for any labor or consequential damages or materials, which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturer's inspection of the defect. No other warranty is hereby given or implied. We do not accept or assume any liability from damages resulting from errors, changes or improper installation of its products.
To File A Claim:
Please call for a return Authorization. Original receipt and warranty registration number will be required for the authorization.
Addition information if applicable: A detailed description of the problem, High quality digital photo, Runout specifications or Vehicle mileage.
If A Claim Is Filed:
The product has to be returned to us for inspection at the customer's expense (Shipping is not covered under the warranty). The product is inspected for claimed defect, and if the condition of product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.
Rotor Warranty
Rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.
* The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.
WARRANTY DOES NOT COVER THE FOLLOWING
1. Brake noise or squealing.
2. Rotors worn to minimum thickness.
3. Pulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.
4. Damage caused by excessive overheating (Bluing) of the rotors
5. Off road, commercial and racing applications.
6. Improper installation, modification, or product abuse.
7. Shipping Charges.
Details
- DTE-T54-078-P
- DTE-T54-078-P
- 708744248466
- Diamond T Enterprises
- New
Shipping Information
- Item Requires Shipping
- 64.0 lbs.
- W13.0000” x H8.0000” x L13.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!