Diamond T 10 Lug Super Single Wheel Adapters for Chevy/GMC (2011.5-13) 2500 (front & rear) (8 on 180mm)
810GM11SS
Diamond T 10 Lug Super Single Wheel Adapters for Chevy/GMC 2500 (front & rear) (8 on 180mm)
Diamond T Enterprises 8 lug to 10 lug hub-centric solid steel adapters milled to specifically fit Chevy/GMC 8 on 180mm single rear wheel trucks. Mount 10 lug on 285.75mm semi wheels on your single rear wheel truck. The industries toughest adapters, made from solid steel - ideal for the abuse and loads required by your 3/4 ton truck. Adapters are 7/8" thick.
Adapters are designed and manufactured in the USA!
Includes lugnuts for the 40 Ten lug pattern.
Chevy vehicles come with lugnuts for the 32 Eight lug pattern and all other makes use factory washer type lug nuts.
***Super Single adapters might need a spacer to give you enough clearance for the brake calipers. Some trucks work fine without spacer. We do offer 2" high grade steel spacers if you need them. These adapters will not work with inside offset wheels, only center and outside offset wheels will work.*****
*Will not fit American Force Wheels
Diamond T Enterprises 8 lug to 10 lug hub-centric solid steel adapters milled to specifically fit Chevy/GMC 8 on 180mm single rear wheel trucks. Mount 10 lug on 285.75mm semi wheels on your single rear wheel truck. The industries toughest adapters, made from solid steel - ideal for the abuse and loads required by your 3/4 ton truck. Adapters are 7/8" thick.
Adapters are designed and manufactured in the USA!
Includes lugnuts for the 40 Ten lug pattern.
Chevy vehicles come with lugnuts for the 32 Eight lug pattern and all other makes use factory washer type lug nuts.
***Super Single adapters might need a spacer to give you enough clearance for the brake calipers. Some trucks work fine without spacer. We do offer 2" high grade steel spacers if you need them. These adapters will not work with inside offset wheels, only center and outside offset wheels will work.*****
*Will not fit American Force Wheels
Availability: ETA on these adapters is currently 1-2 weeks.
Was:
$2,821.99
Sale:
$1,900.99
Save:
33%
Save:
$921.00
Description
Description
-Step 1: Remove your factory wheel assembly.
-Loosen and remove factory lug nuts.
-Remove existing wheel and tire assembly
Step 2: Attach the adapter to the factory 8 lug hub assembly
-Please note front and rear adapters are different confirm before installation.
-Adapters must fit flat against the vehicle's hubs. Remove any rust and dirt from the hubs of brake rotors and drums. Remove any temporary retaining devices, like stud
clips, they may interfere with the flush fitment of your adapters against the brake hubs.
-Using the factory flat washer lug nuts, use an air gun or torque wrench to torque the factory flat washer lug nuts to 140lbs on to the adapter. -After tightening all 8
factory lug nuts to the adapter, inspect the installation.
-Make sure the adapter is sitting secure and flush with the hub of the truck.
Step 3: Install your 10 lug wheel
-Attach the 10 lug wheel to the adapter and slide it on to the large hub of the adapter.
-Using an air gun or torque wrench, torque the large 10 bolt lug nuts to the wheel.
-After tightening all 10 large lug nuts to the wheel, inspect the installation.
-Make sure the wheel is sitting secure and flush with the hub of the adapter.
Fitment
Year Make Model Engine: 2011 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2011 Chevy/GMC 2500 Gas
Year Make Model Engine: 2012 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2012 Chevy/GMC 2500 Gas
Year Make Model Engine: 2013 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2013 Chevy/GMC 2500 Gas
Availability Remarks: ETA on these adapters is currently 1-2 weeks.
-Step 1: Remove your factory wheel assembly.
-Loosen and remove factory lug nuts.
-Remove existing wheel and tire assembly
Step 2: Attach the adapter to the factory 8 lug hub assembly
-Please note front and rear adapters are different confirm before installation.
-Adapters must fit flat against the vehicle's hubs. Remove any rust and dirt from the hubs of brake rotors and drums. Remove any temporary retaining devices, like stud
clips, they may interfere with the flush fitment of your adapters against the brake hubs.
-Using the factory flat washer lug nuts, use an air gun or torque wrench to torque the factory flat washer lug nuts to 140lbs on to the adapter. -After tightening all 8
factory lug nuts to the adapter, inspect the installation.
-Make sure the adapter is sitting secure and flush with the hub of the truck.
Step 3: Install your 10 lug wheel
-Attach the 10 lug wheel to the adapter and slide it on to the large hub of the adapter.
-Using an air gun or torque wrench, torque the large 10 bolt lug nuts to the wheel.
-After tightening all 10 large lug nuts to the wheel, inspect the installation.
-Make sure the wheel is sitting secure and flush with the hub of the adapter.
Fitment
Year Make Model Engine: 2011 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2011 Chevy/GMC 2500 Gas
Year Make Model Engine: 2012 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2012 Chevy/GMC 2500 Gas
Year Make Model Engine: 2013 Chevy/GMC 2500 Diesel
Year Make Model Engine: 2013 Chevy/GMC 2500 Gas
Availability Remarks: ETA on these adapters is currently 1-2 weeks.
Details
- 810GM11SS
- 810GM11SS
- 708744248152
- Diamond T Enterprises
- ETA on these adapters is currently 1-2 weeks.
- New
Categories
Shipping Information
- Item Requires Shipping
- 126.0 lbs.
- W14.0000” x H7.0000” x L28.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!