Horn Air 232 Air System

This lightweight, yet powerful, onboard air system is the perfect solution for putting train horns on your vehicle. This system was specifically designed for use with Shocker Series train horns, but works well with just about anything.

The kit only weighs 19lbs installed and provides 2 gallons of 150 PSI air. The fast filling 325C air compressor can recharge the tank from 110 to 150 in just under 50 seconds. The fitting kit includes a safety blow-off and drain cock, and leaves one port spare so you can easily install another accessory. All this at an affordable price.

This package is perfect for filling up load leveling air springs. If your truck has air springs without a compressor setup, this is the perfect compliment. Please note that if you use horns, you will still need an air spring kit to connect the system properly.

Unlike some other air systems, HornAir kits come with 10 and 18 gauge wire, and a complete wiring kit including a fuse holder. This takes out the guess work on your end and makes sure your system is installed correctly.

Another great feature of HornAir systems is that they come with a standard 1/2in OD push-to-pull fitting. This means the horns you hook up with get all the air they need.

Kit Includes:
-325C Air Compressor
-300 PSI US Made Air Tank
-110/150 PSI Weatherproof Pressure Switch
-1/2in Push-to-Pull Air Line Fitting
-Safety Blow-Off
-Drain Cock
-20ft 10ga Wire
-20ft 18ga Wire
-Inline Fuse Holder
-Terminal Kit
-Detailed Instructions