Edge Products Insight CTS4 Digital Gauge Monitor, Universal OBD-II (1996 & Newer)
- Monitor only, no tune: A dedicated in-cab gauge screen that reads supported engine, drivetrain, temperature and pressure data from the OBD-II port without touching your calibration.
- Bigger 5.5-inch touchscreen: The high-resolution color screen has 21% more viewing area than the 5-inch CTS3, refreshes gauges at 60 FPS and dims automatically.
- Much faster hardware: A 1.7GHz dual-core 64-bit processor (3.4x the CTS3) and 2GB of 3400MHz LPDDR4 RAM give you roughly 70% faster cold boot and 50% faster PID changes.
- Broad OBD-II fitment: Works on most 1996-and-newer OBD-II gas and diesel vehicles. Available parameters and features vary by vehicle.
- Set it up your way: Choose the parameters you care about, pick from multiple gauge layouts and set custom alerts so a climbing temp or pressure gets your attention.
- Logging, codes and tests: Record drive data for troubleshooting, read and clear diagnostic trouble codes, and run built-in performance tests from the driver's seat.
- Simple plug-in install: Mount the monitor in the cab, route the cable to the OBD-II port and connect. No gauge pods to cut in and no extensive wiring.
- Expandable with EAS: Add Edge EAS sensors such as EGT probes and pressure/temp sensors, use the 5-volt data logging inputs, or add the Edge 98204 backup camera kit.
- Upgrade path included: Step up to Evolution CTS4 tuning or Insight+ CTS4 custom tune support later through an internet update, no new device required. Wi-Fi updates keep the software current.
- No emissions impact: Emission Code 5: it does not affect emissions and is legal in all 50 states.
Description
The Edge Insight CTS4 is a standalone digital gauge monitor for most 1996-and-newer OBD-II gas and diesel vehicles. It plugs into the OBD-II port and puts supported engine, drivetrain, temperature and pressure readings on a dedicated screen in the cab, including data the factory cluster often doesn't show. There's no tune on this unit; it's a monitor, plain and simple. Parameter coverage depends on the vehicle.
CTS4 is a big hardware jump over CTS3. The 5.5-inch high-resolution touchscreen gives you 21% more viewing area than the old 5-inch display and runs gauges at a smooth 60 FPS. Behind it sits a 1.7GHz dual-core 64-bit processor with 3.4x the processing power, plus 2GB of 3400MHz LPDDR4 RAM, a 300% increase in memory. Edge rates cold boot about 70% faster, setup time 50% shorter and PID changes 50% quicker. Custom alerts, data logging, performance tests, DTC read and clear, auto-dimming and Wi-Fi updates are all built in.
This is a good fit for the tow rig owner who wants temps in view on a long grade, the DIYer chasing a drivability problem with a data log, or anyone with a modified truck who has outgrown the factory gauges. It works just as well on a stock daily driver. As the build grows you can add EAS sensors like an EGT probe or pressure and temp sensors, a vehicle-specific pillar mount or pod, or the 98204 backup camera kit.
Install is straightforward: mount the screen, run the cable to the OBD-II port and plug it in. The Insight CTS4 does not include any tuning, and available parameters, features and accessory support vary by vehicle. As an Emission Code 5 product it doesn't affect emissions and is legal in all 50 states. If you later add Evolution or Insight+ tuning by update, check the emissions status of that upgrade for your state first.
Starting with the Insight CTS4 makes sense if you want solid monitoring now and might want tuning down the road. The screen you mount today can take on Evolution or Insight+ capability through an internet update instead of being replaced.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Details
- 84130-4
- 84130-4
- 850058611815
- Edge Products
- New
Categories
Shipping Information
- Item Requires Shipping
- 1.6 lbs.
- W7.0000” x H4.0000” x L10.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!