DieselSite RMI-25 Coolant Treatment
RMI25
DieselSite RMI-25 Coolant Treatment
RMI-25 is a low-cost, effective safeguard against cooling system failure, and a much more effective solution than standard SCAs. It cleans while you drive, inhibiting rust, stopping cavitation, erosion, electrolysis and pitting. It also lubricates water pump seals, bearings, and thermostats, and improves cooling. RMI-25 should be at work in every water -cooled engine.
RMI-25 is a low-cost, effective safeguard against cooling system failure, and a much more effective solution than standard SCAs. It cleans while you drive, inhibiting rust, stopping cavitation, erosion, electrolysis and pitting. It also lubricates water pump seals, bearings, and thermostats, and improves cooling. RMI-25 should be at work in every water -cooled engine.
Was:
$17.59
Sale:
$14.99
Save:
15%
Save:
$2.60
Description
RMI dissolves rust, mineral deposits, and corrosion.
Just 1/16" of mineral deposits on 1" of cast iron is equivalent to 4.5" of cast iron reducing heat dissipation by 40%.
A spot of rust can raise the temperature at that "hot spot" by as much as 700 degrees!
•Cleans - radiators, engine blocks, heater cores, hoses .... the complete system
•Inhibits - rust, buildup of mineral deposits, cavitation erosion, electrolysis and pitting
•Lubricates - thermostats, water pumps, seals and heater controls
•Conditions - contains a pH stabilizer for acid-alkaline balance
•Flushes - power flushes in combination with your water pump while you drive
•Detects Leaks - contains a leak detector which pinpoints leaks under a black florescent lamp
Adding RMI requires:
NO draining and flushing
NO downtime, no shop time, no labor costs
NO loss of antifreeze/coolant
NO 30-40 minute engine idle run time
NO harm to skin or eyes or to the environment
NO coolant gel problems
One 8oz bottle per 5 gallons of cooling capacity.
For Diesel applications; Introduce 2 bottles for initial treatment, then 1 bottle every 15k miles.
Just 1/16" of mineral deposits on 1" of cast iron is equivalent to 4.5" of cast iron reducing heat dissipation by 40%.
A spot of rust can raise the temperature at that "hot spot" by as much as 700 degrees!
•Cleans - radiators, engine blocks, heater cores, hoses .... the complete system
•Inhibits - rust, buildup of mineral deposits, cavitation erosion, electrolysis and pitting
•Lubricates - thermostats, water pumps, seals and heater controls
•Conditions - contains a pH stabilizer for acid-alkaline balance
•Flushes - power flushes in combination with your water pump while you drive
•Detects Leaks - contains a leak detector which pinpoints leaks under a black florescent lamp
Adding RMI requires:
NO draining and flushing
NO downtime, no shop time, no labor costs
NO loss of antifreeze/coolant
NO 30-40 minute engine idle run time
NO harm to skin or eyes or to the environment
NO coolant gel problems
One 8oz bottle per 5 gallons of cooling capacity.
For Diesel applications; Introduce 2 bottles for initial treatment, then 1 bottle every 15k miles.
Details
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- W4.0000” x H4.0000” x L6.0000”
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!