Edge Products Pulsar CA + Insight CTS3 Kit for Chevy/GMC (2017-19) 2500/3500 6.6L L5P Duramax
- Fitment: Built for 2017-2019 Chevy Silverado/GMC Sierra 2500HD/3500HD 6.6L L5P Duramax trucks.
- Two ways to change power: Five levels on the fly from the factory cruise control +/- buttons or from the Insight CTS3 screen.
- Inline at the ECM: The Pulsar plugs in at the engine computer under the hood; no ECM flash and no extra harness.
- Adjustable backdowns: EGT backdown (1000-2000 degrees, level specific), transmission slip, gear change and cold engine backdowns, each on or off.
- Turbo timer: Set the cool-down by EGT (250-700 degrees) and/or time, up to 15 minutes.
- Speedo, gears and TPMS: Recalibrate for 29-50 inch tires, adjust axle ratio and set TPMS pressure from 1-100 PSI.
- Truck settings: Speed limiter adjusts from 98-140 MPH and high idle from 700-1100 RPM, with throttle sensitivity set per level.
- Service functions: Manual regen, transmission relearn for new power levels and injector balance rates through the Insight.
- No laptop for updates: Pulsar updates are handled through the Insight CTS3 instead of a computer.
- 50-state legal: Legal for sale and use in all 50 states under CARB E.O. D-802-9 when installed per Edge's application guide.
Description
This Edge kit pairs the Pulsar CA inline module with an Insight CTS3 monitor for 2017-2019 Chevy Silverado and GMC Sierra 2500HD/3500HD trucks with the 6.6L L5P Duramax. The Pulsar adds on-the-fly power at the ECM, and the CTS3 gives you a screen to run it from while keeping an eye on the engine.
Five power levels can be switched from the steering wheel cruise buttons or the monitor. Through the Insight you also get user-selectable throttle sensitivity per level, a 98-140 MPH speed limiter adjustment, high idle from 700-1100 RPM, EGT backdown from 1000-2000 degrees, transmission slip, gear change and cold engine backdowns, speedometer correction for 29-50 inch tires, axle ratio adjustment, TPMS pressure from 1-100 PSI, a turbo timer by EGT (250-700 degrees) or time up to 15 minutes, transmission relearn, injector balance rates and manual regen. The kit includes the Pulsar module and the Insight CTS3 with its 5-inch color touchscreen.
For a truck that tows for a living, the combination makes sense: pick a level for the load, set the backdowns where you're comfortable, and watch the numbers on the CTS3 instead of guessing. The turbo timer and manual regen are handy on a truck that idles and works short cycles.
The Pulsar plugs in at the ECM with no cutting or splicing, and the monitor connects at the OBD-II port; follow Edge's Pulsar/Insight instructions. Edge notes that physically changing ring and pinion gears on these GM trucks disables the factory cruise control; the Pulsar can correct the speedometer for the new ratio but cannot turn cruise back on, since GM ties that to the engine calibration. Legal for sale and use on emissions-controlled vehicles in all 50 states under CARB E.O. D-802-9 when used per Edge's application guide.
Compared with the Pulsar CA module alone (22400), this kit adds the CTS3 screen and opens up the turbo timer, speed limiter, TPMS and service functions from the cab. The Pulsar V3 + Insight CTS3 kit (22602-3) is the non-California alternative for the same trucks.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Video
Details
- 22600-3
- 22600-3
- 810065210241
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 8.0 lbs.
- W9.8000” x H4.0000” x L17.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!