Additional Images

Edge Products Insight CTS3 Digital Gauge Monitor, Universal OBD-II (1996-2026)

84130-3
  • 5-inch touchscreen: Full-color capacitive display with auto-dimming and customizable gauges and backgrounds.
  • Fitment: Compatible with most domestic gas and diesel vehicles 1996 and newer with an OBD-II port.
  • Plug and play: Plugs into the OBD-II port with no wiring, and a windshield mounting bracket is included.
  • Dozens of readings: Watch EGT, regen cycles, transmission temp, boost, RPM, fuel rail pressure and more.
  • Swipe between layouts: Set up separate screens for towing, performance or economy, and it boots straight to your gauges at key-on.
  • Data logging: Integrated data logger with export, plus custom alerts to protect the engine under load.
  • DPF regen: Manual regen on 2018-20 3.0L F-150 diesel, 2011-24 6.7L Ford, 2007.5-24 6.6L GM and 2020-22 3.0L Duramax; mobile regen on 2015-22 3.0L Ram, 2007-18 6.7L Ram and 2011-23 6.6L GM.
  • Codes and tests: Reads and clears DTCs and runs 0-60 and quarter-mile performance tests.
  • Expandable: Edge's accessory system adds gauges or controls switches for lights, compressors and winches.
  • No E.O. needed: Wi-Fi updateable, and as a monitor it does not affect emissions, so no CARB E.O. is required.
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to CA
Was: $618.95
Sale: $549.95
Save: 11%
Save: $69.00

Qty:
NOTE: This product has the following shipping restriction(s):
  • Cannot ship to CA
Free Shipping

Description

The Edge Insight CTS3 (84130-3) is a 5-inch touchscreen gauge monitor that plugs into the OBD-II port on most domestic gas and diesel vehicles 1996 and newer. Ram Cummins, GM Duramax, Ford Power Stroke, F-150 and V8 Silverado owners all run it, and it replaces a pillar full of mechanical gauges with one display.

The full-color capacitive screen auto-dims and lets you build your own layouts, then swipe between them. It monitors dozens of parameters including EGT, boost, transmission temp, fuel rail pressure, RPM and regen status, logs data with export, reads and clears codes and has a built-in performance meter for 0-60 and quarter-mile runs. It updates over Wi-Fi, and a windshield mount comes in the box. Through Edge's Expandable Accessory System you can add sensors or switch control for lights, compressors and winches.

On a tow rig it's the screen you glance at on every long pull: trans temp, coolant and EGT (with an EAS probe) right where you can see them, with alerts if something climbs. On late-model diesels it can also run DPF regens on supported trucks, which beats waiting for the truck to decide on its own.

Install is plug and play with no wiring. DPF regen support: manual regen on 2018-2020 3.0L Ford F-150 diesel, 2011-2024 6.7L Ford, 2007.5-2024 6.6L GM and 2020-2022 3.0L GM Duramax; mobile regen on 2015-2022 3.0L Ram, 2007-2018 6.7L Ram and 2011-2023 6.6L GM. Available readings vary by vehicle, and EGT and other added sensors require EAS accessories sold separately. Optional Edge display mounts are available for some trucks. As a monitor, it doesn't affect emissions and needs no CARB E.O.

Edge also offers the newer Insight CTS4 (84130-4) with a 5.5-inch screen and faster processor. The CTS3 is still a current Edge product and remains a proven, full-featured monitor for most trucks.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Video

Details

  • 84130-3
  • 84130-3
  • 810009938903
  • Edge Products
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W6.2500” x H4.0000” x L9.5000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.