Additional Images

Tough Country Custom Traditional Front Bumper, Dodge (2006-09) 1500 Mega Cab, 2500, & 3500 Ram

SKU: TFR2006D-

The Traditional Front Bumper has the same Tough Country strength and durability with a classic look. The Tough Country Traditional Front Replacement may look like other front replacements, but it is built "Tough Country" style! It has a 4" pipe base, with heavy upright push bars and 1.25" pipe, light loops for maximum protection; but added strength isn't the only thing that sets this front apart. The Traditional Front is frame mounted, requires no vehicle modifications, and gives you more options than any other brand.

-Use strong 4? Pipe Base with heavy upright push bars
-1.25” Pipe Light loops for maximum protection
-Traditional Look
-Frame mounted
-Requires no vehicle modifications
-Can be ordered with the universal winch box
-Standard finish is a high gloss black industrial powder coat

*Does not retain factory tow hooks

•2006-2009 1500 (Mega Cab Only)
•2006-2009 2500
•2006-2009 3500

Was: $3,380.00

Sale: $2,389.75

Save: 29%

Save: $990.25

Customize Your Item

For serious off-roaders, shackle mounts offer both, additional towing points on your vehicle, and a great place to attach a winch cable back to the bumper when using a snatch block. These are ¾" CNC plasma cut steel tabs welded on to the pipe base with 1" holes to accommodate our heavy duty ¾" Shackles.

3/4 inch Shackle Mounts +$79.99

The heavy duty pair of ¾" Galvanized Shackles can be bolted to the Shackle Mounts and are great for hooking your tow strap or snatch block to when trying to get out of a tight spot.

3/4 inch Shackle Hooks +$36.00

Finish Option

- Finish Option -

This option provides the holes to maintain your sensors in the front bumper if your truck was equipped with them from the factory.

Front Sensors

- Front Sensors -

* required

So that you can have additional lights on your truck, you can get steel tabs welded to the cross bars. Perfect for off road enthusiasts who want to mount additional lights or a LED light bar to the front bumper. The secure mounts show how Tough Country takes the extra steps to give your new bumper a truly custom look for your truck. If you have any specific requirements such as if you are going to be installing a LED light bar, you will need to advise how far apart you need the mounting tabs in the notes section during checkout.

Light Tabs

- Light Tabs -

The Expanded Metal Grill will help protect your truck's front grill and radiator from debris, sticks, and branches. It is made from a ¾ inch #9 flat expanded metal sheet and is welded into the grill section of your bumper during manufacturing. Expanded Metal Grill

Expanded Metal Grill +$40.00

So that you can have fog lights on your truck, a plasma cut hole is made and a hand formed steel tube is welded in its place. Custom fabricated brackets are welded on to hold the lights as if they were mounted in the factory, keeping your lights protected and giving you that clean sleeve look. The secure mounts show how Tough Country takes the extra steps to give your new bumper a truly custom look for your factory lights.

Fog Light Sleeves

- Fog Light Sleeves -

* required

Standard 2" receiver tube allows you to conveniently mount a hitch accessory on the front of your bumper. This option allows for the use of many accessories such as a winch cradle, cargo basket, game rack, or ball mount for backing (pushing) trailers in tight places.

Protruding Receiver Tube +$75.00

Extends approximately 2½ inches from the front of the pipe base. Can be used with any standard shank ball mount.

Flush Receiver Tube +$75.00

Receiver tube is welded in the center of the pipe base, cut off and ground smooth. **NOTE: Must be pinned from the back of the pipe, accessed from the bottom of the bumper, and requires at least 5¼ inches of unobstructed hitch shank to pin.

This CNC plasma cut winch box is unique from other winch boxes in that it allows your winch to remain exposed for ease of use, so that you can keep your cable from balling up. It is fabricated from heavy ?" plate and pre-punched. Like our Universal Winch Box, the Mile Marker Hydraulic Winch Box provides ease of use by allowing your winch to remain exposed. While it is also made from the ?" plate, this box is smaller and more streamlined than the Universal, giving your bumper a more custom look with a more precise fit for the hydraulic winch. The dimensions of this box are 27" wide x 7" deep with a 6¼" tall face plate and will accommodate only Mile Marker Hydraulic Winches.

Winch Mount

- Winch Mount -

Qty:

Free Shipping

Description
Details
Shipping
Reviews

Description

*This is a Custom Series Tough Country Bumper and takes up to 3-4 weeks for production. If your wanting something sooner, take a look at the Standard Series Tough Country Bumpers.