ATS Automatic Transmission, Chevy/GMC (2001-02) 6.6L Duramax, LCT1000 5-Speed Stage 1 Kit, 4wd
3099154248
All ATS transmissions are designed to handle extreme power and heavy loads, and then dyno tested to ensure reliable functionality and high performance. ATS transmissions eliminate the factory weaknesses and design flaws, replacing them with engineering that works. They are so confident of that, all ATS transmissions are backed by the only 5-year, 500,000 mile warranty in the industry. This rebuilt ATS high performance transmissions includes the following features fully re-manufactured dyno tested ATS High Performance Valve Body, High Volume Pump, Heavy Duty Gear Train, Extreme Duty Clutch Pack, Other proprietary internal components, High stress areas of case are reinforced, Critical bolt and thread holes are inserted, Valve Body surface is machined flat, Redesigned and calibrated hydraulic system, and the External surface of case is sealed. Shipping charge includes shipping your new transmission, and shipping your old transmission back to ATS so you can be refunded for the core charge.
Saying a lot of R&D has gone into our built Allison 1000 transmissions would be the understatement of the century. Between the engineering team designing parts that our transmission specialists have devolped and the thousands of testing hours on thousands of trucks around the world, no other transmission has been put through the paces like the ATS transmission has. We have transmissions in anything from stock truck with worn out factory transmissions, to professional hot shot drivers, to weekend drag racers and sled pullers, to competition drag racers and sled pullers, and even all the way as wild as a snow cat! The ATS built transmission was designed and produced for what you want out of it and how you are going to drive.
Saying a lot of R&D has gone into our built Allison 1000 transmissions would be the understatement of the century. Between the engineering team designing parts that our transmission specialists have devolped and the thousands of testing hours on thousands of trucks around the world, no other transmission has been put through the paces like the ATS transmission has. We have transmissions in anything from stock truck with worn out factory transmissions, to professional hot shot drivers, to weekend drag racers and sled pullers, to competition drag racers and sled pullers, and even all the way as wild as a snow cat! The ATS built transmission was designed and produced for what you want out of it and how you are going to drive.
Was:
$5,761.14
Sale:
$4,800.95
Save:
17%
Save:
$960.19
Description
2001-02 GM Truck 4WD Stage 1 Automatic Transmission Package
Includes:
ATS Built LCT1000 5-Speed Automatic Transmission
ATS Five Star Viskus Clutch Drive Torque Converter
ATS Extra Deep Transmission Pan
What sets the ATS transmission apart from the rest can be summed up in two words: innovation and technology.
Clutches - ATS manufactures each and every clutch used in any transmission or torque converter, and we are the only ones who do this. We do this by using a 3 axis high-intensity CNC laser to cut out all our clutch steels which allows us to make even the smallest of changes any time we see room for improvement. What this means is we can make the change and put it into testing and get it to the market almost immediately, where other company are stuck with what they can buy.
Along with this, we have formulated our own unique clutch material that is ONLY used in ATS transmissions. It also uses a bonding agent that will not disintegrate with heat or water, once it has bonded with the steel, they essentially become one piece. All clutch material is also bonded in house, which means unparalleled quality control over the parts that YOU rely on to get you to work, down the race track, or through a family vacation.
With our clutch designs and the style in which we build those clutches, we are able to add over 200% torque capacity to the transmission, allowing for more power and heavier loads put on the transmission without compromising reliability.
Valvebody and pump - The valve body, while working with the computer, is essentially the brain of the transmission. It is what routes fluid to particular clutch packs based on which gear your truck needs to be in. Needless to say, this is an important part, so naturally it was in need of improvement. A stock transmission will run with line pressures, somewhere around 90 psi. While this is no problem for stock power, it has little room for any added torque.
With the ATS shift kit (A and B trim valves and converter flow valve) and pump upgrade kit (pressure regulator valve and pressure regulator spring) we bump the pressure in the transmission up to 250 psi. This is what is going to give the clamping force on the clutches and give that added torque capacity. Add in a co-pilot, and that has the ability to reach 300 psi. Not only does this allow the transmission to hold more power, but it also allows for quick, crisp shifts with little to no delay in shift timing. So what you are going to notice, is that not only do you get through the gears quicker, but you will not kill off RPM, and more importantly boost from your turbo charger.
Includes:
ATS Built LCT1000 5-Speed Automatic Transmission
ATS Five Star Viskus Clutch Drive Torque Converter
ATS Extra Deep Transmission Pan
What sets the ATS transmission apart from the rest can be summed up in two words: innovation and technology.
Clutches - ATS manufactures each and every clutch used in any transmission or torque converter, and we are the only ones who do this. We do this by using a 3 axis high-intensity CNC laser to cut out all our clutch steels which allows us to make even the smallest of changes any time we see room for improvement. What this means is we can make the change and put it into testing and get it to the market almost immediately, where other company are stuck with what they can buy.
Along with this, we have formulated our own unique clutch material that is ONLY used in ATS transmissions. It also uses a bonding agent that will not disintegrate with heat or water, once it has bonded with the steel, they essentially become one piece. All clutch material is also bonded in house, which means unparalleled quality control over the parts that YOU rely on to get you to work, down the race track, or through a family vacation.
With our clutch designs and the style in which we build those clutches, we are able to add over 200% torque capacity to the transmission, allowing for more power and heavier loads put on the transmission without compromising reliability.
Valvebody and pump - The valve body, while working with the computer, is essentially the brain of the transmission. It is what routes fluid to particular clutch packs based on which gear your truck needs to be in. Needless to say, this is an important part, so naturally it was in need of improvement. A stock transmission will run with line pressures, somewhere around 90 psi. While this is no problem for stock power, it has little room for any added torque.
With the ATS shift kit (A and B trim valves and converter flow valve) and pump upgrade kit (pressure regulator valve and pressure regulator spring) we bump the pressure in the transmission up to 250 psi. This is what is going to give the clamping force on the clutches and give that added torque capacity. Add in a co-pilot, and that has the ability to reach 300 psi. Not only does this allow the transmission to hold more power, but it also allows for quick, crisp shifts with little to no delay in shift timing. So what you are going to notice, is that not only do you get through the gears quicker, but you will not kill off RPM, and more importantly boost from your turbo charger.
Details
- 3099154248
- 3099154248
- 3099154248
- ATS Diesel Performance
- New
Shipping Information
- Item Requires Shipping
- 400.0 lbs.
- W42.0000” x H40.0000” x L48.0000”
- Free Shipping
- This item will require a special quote for shipping charges.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!