Edge Products Pulsar for Ram (2019-24) 2500/3500 6.4L Hemi
- Up to 25 HP and 40 lb-ft: Added power and torque at the top level, with no PCM swap, flash or computer removal.
- Fitment: Made for 2019-2024 Ram 2500/3500 6.4L Hemi trucks. 2023-2024 trucks must have the analog dash; digital dash models are not compatible.
- Eight levels on the fly: Pick from up to 8 power levels with the cruise control buttons; the level shows on the factory dash.
- MDS on or off: User-selectable MDS lets you keep the Hemi on all eight cylinders.
- Timing and pedal: Advanced ignition timing and adjusted accelerator pedal response.
- Tires and gears: Correct the speedometer for 20-59 inch tires and gear ratios from 2.00 to 5.99.
- Clears codes: Erases fault codes when you need to clear a light.
- Inline install: Plugs into the factory PCM and leaves the stock computer in place.
- Legal status: Not legal for sale or use in California or on pollution-controlled vehicles in states that adopt California rules. The manufacturer lists it as legal under the EPA's November 23, 2020 Tampering Policy in states that accept that policy; CARB testing is pending.
- Cannot ship to California, Colorado or New York
Description
The Pulsar is an inline performance module for 2019-2024 Ram 2500/3500 6.4L Hemi trucks. It plugs into the factory PCM and adds power and drivability without a PCM swap, flash tuning or pulling the computer. On 2023-2024 trucks it works with the analog instrument cluster only; digital dash models are not compatible.
At its top level it adds up to 25 HP and 40 lb-ft. You get up to eight levels, changed with the cruise control buttons and displayed on the OEM dash, along with advanced ignition timing, adjusted accelerator pedal response and user-selectable MDS on/off. Speedometer correction covers tires from 20 to 59 inches and gear ratios from 2.00 to 5.99, and it erases fault codes. The package is the Pulsar module and instructions; there is no monitor.
Hemi owners mostly notice the pedal and the MDS. Turn MDS off when you're towing or just tired of the cylinder deactivation, sharpen the throttle, and pick a level that suits the day instead of the factory one-size calibration.
Install is plug-in at the PCM with no extra harness; follow the Pulsar instructions. Not legal for sale or use in California or on pollution-controlled vehicles in states that adopt California rules. The manufacturer lists it as legal under the EPA's November 23, 2020 Tampering Policy in states that accept that policy; CARB testing is pending.
Edge's matching kit with the Insight CTS3 touchscreen is the Pulsar + Insight CTS3 33553-3. For 2015-2018 6.4L trucks, use the Pulsar 32452.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Details
- 32454
- 32454
- Edge Products
- New
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.

Write the First Review!