Flight Diesel MPROP - Flow Control Valve for Dodge/Ram (2003-07) 5.9L Cummins, FCA 0928400666
R928400666
This is a Remanufactured Bosch fuel pressure regulators for common rail fuel injection pumps. It is remanufactured and tested to the strictest OE standards for optimal performance. 100% visually inspected and quality tested, and is backed by our 100% satisfaction guarantee.
•These are also known as MPROP's. The symptoms of a faulty MPROP would be rail pressure that is too high or too low.
•The MPROP will often fail before the pump does, getting stuck and causing the symptoms mentioned above.
The purchase price of this pressure regulator DOES NOT include the $50 core deposit. We provide a FREE pre-paid return shipping label and give you 30 Days to send your old part (core) back to us.
•These are also known as MPROP's. The symptoms of a faulty MPROP would be rail pressure that is too high or too low.
•The MPROP will often fail before the pump does, getting stuck and causing the symptoms mentioned above.
The purchase price of this pressure regulator DOES NOT include the $50 core deposit. We provide a FREE pre-paid return shipping label and give you 30 Days to send your old part (core) back to us.
Pricing:
$109.99
Description
•Fully Remanufactured.
•All components are re-certified to OE specifications.
•Multiple point delivery tested.
REMOVAL
•Remove the cap screws and Fuel Control Actuator (FCA).
•Twist and pull FCA to remove.
INSTALLATION
•Lubricate the new Fuel Control Actuator (FCA) O-ring with clean oil before installation.
•Turn the FCA in a clockwise direction while pressing it into the bore. Be sure that the FCA flange is flush with the mounting surface on the Fuel Injection Pump.
•Install the capscrews by hand.
•Then tighten capscrews to 7Nm (62 in-lbs) .
•Plug the electrical connector back into the FCA.
•Start the Truck and observe for leaks.
Fitment:
2003-2007 5.9L Dodge Cummins CP3
Warranty:
•1 Year
•Unlimited Mileage
•All components are re-certified to OE specifications.
•Multiple point delivery tested.
REMOVAL
•Remove the cap screws and Fuel Control Actuator (FCA).
•Twist and pull FCA to remove.
INSTALLATION
•Lubricate the new Fuel Control Actuator (FCA) O-ring with clean oil before installation.
•Turn the FCA in a clockwise direction while pressing it into the bore. Be sure that the FCA flange is flush with the mounting surface on the Fuel Injection Pump.
•Install the capscrews by hand.
•Then tighten capscrews to 7Nm (62 in-lbs) .
•Plug the electrical connector back into the FCA.
•Start the Truck and observe for leaks.
Fitment:
2003-2007 5.9L Dodge Cummins CP3
Warranty:
•1 Year
•Unlimited Mileage
Details
- R928400666
- R928400666
- Flight Diesel
- New
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!