aFe Power Momentum GT Red Edition Cold Air Intake System for Dodge (2011-23) Challenger/Charger R/T V8-5.7L HEMI, Pro Dry S
51-72202-R
aFe Power Momentum GT Red Edition Cold Air Intake System for Dodge Challenger/Charger R/T V8-5.7L HEMI, Pro Dry S
Unique One-Piece Housing w/ Sight Window:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of red cross-linked polyethylene. It accommodates the "Hellcat" headlight air inlet for 2015-2023 Dodge Challenger models only (requires scoop p/n 54-72203-SR).
Features:
•Dyno-Proven Gains up to +14 HP & +14 Lbs. x Ft. TQ
•Outflows Factory Intake by 23%
•Measured Flow: 500 CFM @ 7" H2O
•CAD-Designed Roto-Molded Intake Tube
•One-Piece Sealed Housing with Air Inlet
•Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
•Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
•Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
•No Cutting or Drilling on OEM Parts for Faster Installation
Unique One-Piece Housing w/ Sight Window:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of red cross-linked polyethylene. It accommodates the "Hellcat" headlight air inlet for 2015-2023 Dodge Challenger models only (requires scoop p/n 54-72203-SR).
Features:
•Dyno-Proven Gains up to +14 HP & +14 Lbs. x Ft. TQ
•Outflows Factory Intake by 23%
•Measured Flow: 500 CFM @ 7" H2O
•CAD-Designed Roto-Molded Intake Tube
•One-Piece Sealed Housing with Air Inlet
•Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
•Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
•Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
•No Cutting or Drilling on OEM Parts for Faster Installation
Was:
$748.99
Sale:
$623.99
Save:
17%
Save:
$125.00
Description
Roto-Molded Tube:
This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Fitment
2011-2014 Chrysler 300 Does Not fit models w/ HID Headlights Gas V8-5.7L
2011-2023 Dodge Challenger Does Not fit models w/ "SHAKER" Hood Gas V8-5.7L
2011-2023 Dodge Charger HEMI Gas V8-5.7L
Emissions Disclaimer
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
****Fitment Note
aFe POWER throttle body spacer (P/N: 46-32007) will NOT fit with this intake.
Will NOT fit models Dodge Challenger equipped with the shaker hood, or Chrysler 300 equipped with factory HID headlights.
This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Fitment
2011-2014 Chrysler 300 Does Not fit models w/ HID Headlights Gas V8-5.7L
2011-2023 Dodge Challenger Does Not fit models w/ "SHAKER" Hood Gas V8-5.7L
2011-2023 Dodge Charger HEMI Gas V8-5.7L
Emissions Disclaimer
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
****Fitment Note
aFe POWER throttle body spacer (P/N: 46-32007) will NOT fit with this intake.
Will NOT fit models Dodge Challenger equipped with the shaker hood, or Chrysler 300 equipped with factory HID headlights.
Details
- 51-72202-R
- 51-72202-R
- aFe
- New
Categories
Shipping Information
- Item Requires Shipping
- 19.0 lbs.
- W17.0000” x H15.0000” x L24.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!