SuperATV In-Dash Cab Heater for Can-Am (2018-26) Maverick Trail (No Quick-Start Flow Valve, No Idle Flow Pump)
HTR-CA-T-ID
SuperATV In-Dash Cab Heater for Can-Am Maverick Trail (No Quick-Start Flow Valve, No Idle Flow Pump)
Ride in the Snow
There's nothing worse than piling on clothes to stay warm, then sweating just to be cold all over again. You can stay warm without all the layers by adding SuperATV's In-Dash Cab Heater to your Can-Am Maverick Trail. Besides the temperature difference, you wouldn't even notice this heater is there—it mounts in your dash and draws heat directly from your engine. And its multiple fan settings allow you to control your cab’s comfort level.
•Mounts in your dash
•Defrosts your windshield
•Provides comfort
•Easy to install
Ride in the Snow
There's nothing worse than piling on clothes to stay warm, then sweating just to be cold all over again. You can stay warm without all the layers by adding SuperATV's In-Dash Cab Heater to your Can-Am Maverick Trail. Besides the temperature difference, you wouldn't even notice this heater is there—it mounts in your dash and draws heat directly from your engine. And its multiple fan settings allow you to control your cab’s comfort level.
•Mounts in your dash
•Defrosts your windshield
•Provides comfort
•Easy to install
Pricing:
$529.99
Description
Defrost Your Windshield
Are you still resorting to filling a cup of water up and pouring it on your windshield to melt ice? Yeah, you don't have to do that anymore. This kit has two defrost vents and hoses in addition to the vents in the heater itself. Are you worried about the hoses cramping your style? They won't. Our design allows for the vents to be routed through your dash, so the only person who will know they are there is you.
Comfortable Cab
Our electric cab heater pulls heat directly from your engine. That means the longer you ride, the more comfortable you'll be. This kit also uses high-grade radiator hoses rated from -40°F to 285°F, so no matter how cold it is outside or how hot your engine gets, your Can-Am Maverick heater can handle it.
Easy Installation
Lucky for you, we've made installation super quick and easy. We provide you with all the hoses, wiring, rocker switches and more. With this heater installed in no time, you'll be able to rip, spin, and slide in the snow before it melts.
Get Heat in Half the Time with a Quick-Start Flow Valve
Improve your heater's efficiency by installing a quick-start flow valve and halving the warm-up time. It channels all engine coolant directly to your heater core at low engine temperatures. As your engine warms up, the valve automatically opens to direct coolant through your radiator too.
Get Heat in 30 Seconds with an Idle Flow Pump
Get your heater to blow hot air in half a minute with our idle flow pump! It keeps the coolant moving quickly through your UTV, so it warms up faster even when you are slow or at idle.
Features:
•Adjustable fan speeds
•360° adjustable vents
•Includes defrost hoses and vents
•Built-in shutoff valve
•5.2 amps at 13.6 volts
•Capable of 20,000 BTU at 135 CFM
•High-grade radiator hoses—rated -40°F to 285°F
•IP67 rating
•Easy install—includes all necessary hardware and instructions
•Add a quick-start flow valve and an idle flow pump to get heated air faster
Fitment:
Can-Am Maverick Trail 800 : 2018+
Can-Am Maverick Trail 1000 : 2018+
Can-Am Maverick Trail 800 DPS : 2018+
Can-Am Maverick Trail 1000 DPS : 2018+
Are you still resorting to filling a cup of water up and pouring it on your windshield to melt ice? Yeah, you don't have to do that anymore. This kit has two defrost vents and hoses in addition to the vents in the heater itself. Are you worried about the hoses cramping your style? They won't. Our design allows for the vents to be routed through your dash, so the only person who will know they are there is you.
Comfortable Cab
Our electric cab heater pulls heat directly from your engine. That means the longer you ride, the more comfortable you'll be. This kit also uses high-grade radiator hoses rated from -40°F to 285°F, so no matter how cold it is outside or how hot your engine gets, your Can-Am Maverick heater can handle it.
Easy Installation
Lucky for you, we've made installation super quick and easy. We provide you with all the hoses, wiring, rocker switches and more. With this heater installed in no time, you'll be able to rip, spin, and slide in the snow before it melts.
Get Heat in Half the Time with a Quick-Start Flow Valve
Improve your heater's efficiency by installing a quick-start flow valve and halving the warm-up time. It channels all engine coolant directly to your heater core at low engine temperatures. As your engine warms up, the valve automatically opens to direct coolant through your radiator too.
Get Heat in 30 Seconds with an Idle Flow Pump
Get your heater to blow hot air in half a minute with our idle flow pump! It keeps the coolant moving quickly through your UTV, so it warms up faster even when you are slow or at idle.
Features:
•Adjustable fan speeds
•360° adjustable vents
•Includes defrost hoses and vents
•Built-in shutoff valve
•5.2 amps at 13.6 volts
•Capable of 20,000 BTU at 135 CFM
•High-grade radiator hoses—rated -40°F to 285°F
•IP67 rating
•Easy install—includes all necessary hardware and instructions
•Add a quick-start flow valve and an idle flow pump to get heated air faster
Fitment:
Can-Am Maverick Trail 800 : 2018+
Can-Am Maverick Trail 1000 : 2018+
Can-Am Maverick Trail 800 DPS : 2018+
Can-Am Maverick Trail 1000 DPS : 2018+
Details
- HTR-CA-T-ID
- HTR-CA-T-ID
- SuperATV
- New
Categories
Shipping Information
- Item Requires Shipping
- 20.0 lbs.
- W13.0000” x H13.0000” x L31.0000”
- Free Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!