KT Performance - Particulate Matter (PM) Sensors

Engine Controllers/Sensors - Particulate Matter (PM) Sensors

Bosch particulate matter (PM) sensors for Ford Power Stroke, Ram Cummins, GM Duramax, Mercedes and VW diesels, plus Cummins, Detroit and Freightliner heavy-duty engines. Each sensor is cross-referenced to the OEM part number and backed by Bosch's 1-year, unlimited mileage warranty.


A particulate matter (PM) sensor sits in the exhaust after the diesel particulate filter (DPF) and measures the soot that gets past it. The engine computer uses that reading to confirm the DPF is trapping soot the way it should. When the sensor fails or its heater circuit stops working, you will usually see a check engine light and PM sensor codes, and on many trucks the computer limits power or blocks a regeneration even though the filter itself is fine.

This category holds genuine Bosch PM sensors, and every part here is cross-referenced to the OEM number it replaces. The range covers light-duty pickups and vans, including Ford 6.7L Power Stroke and 3.2L Transit, Ram 6.7L Cummins, GM 6.6L Duramax L5P, 2.8L and 3.0L Duramax, and Mercedes Sprinter diesels, along with VW/Audi/Porsche 3.0 TDI, Isuzu, and heavy-duty Cummins QSX and X15, Detroit and Freightliner engines.

To choose the right one, start with your engine and model year, then check the OEM part number on the old sensor or your parts catalog. Several trucks used more than one PM sensor in the same years, split by pickup versus cab and chassis, wheelbase or build date, so match the OEM number when you can. Each listing shows the vehicles it fits and the OEM numbers it replaces. Every sensor is sold individually and comes with Bosch's 1-year, unlimited mileage warranty.

Frequently asked questions

What does a PM sensor do?
It measures soot in the exhaust after the DPF so the engine computer can confirm the filter is working. It does not measure how full the DPF is; that is the job of the DPF pressure sensor.

What are the signs of a bad PM sensor?
A check engine light with particulate matter sensor codes (such as P24AF, P24B0 or P24B1 on many trucks), reduced power, or regenerations that will not complete. Check the wiring and connector before replacing the sensor.

Is a PM sensor the same as a NOx sensor?
No. They look alike, with a probe, a lead and a control module, but a NOx sensor measures nitrogen oxides for the SCR system. Match the OEM part number to be sure you have the right one.

Do I need to do anything after installing a new PM sensor?
Clear the codes and drive the truck. Some trucks need a scan tool to run the PM sensor self-test or reset learned values before the light stays off.