KT Performance - Fifth Wheel Hitches

Towing & Recovery - Fifth Wheel Hitches

Fifth wheel hitches for 3/4-ton and 1-ton pickups, plus the rails, base rails and install kits that mount them. Shop hitches that drop into a gooseneck ball or a factory puck system so you can tow a fifth wheel camper or trailer with the bed still usable.


A fifth wheel hitch sits in the bed of a pickup, over or just ahead of the rear axle, and couples to the king pin on a fifth wheel camper or trailer. Putting the load over the axle instead of behind the bumper is what lets a 3/4-ton or 1-ton truck pull a heavy RV with steady, predictable handling. This category holds the hitches themselves and the hardware that mounts them: fifth wheel rails, base rails and installation kits.

There are two common ways to mount a fifth wheel. The first uses a gooseneck hitch or factory puck system that is already in the truck. Hitches such as the B&W Companion lock into the gooseneck ball hole or the factory puck mounts, so the hitch lifts out in a few minutes and leaves a flat bed when you are not towing. The second uses rails or base rails bolted across the bed, with the hitch head pinned to the rails. Slider versions move the hitch back when turning so a short-bed truck has cab clearance.

To choose, start with your truck and how it is set up: factory puck system, an aftermarket gooseneck hitch, or a bare bed. Then match the hitch rating to your trailer. Each listing names the trucks it fits and its towing and pin weight ratings.

Frequently asked questions

Can I use my gooseneck hitch to tow a fifth wheel?
Yes, with a gooseneck-mounted fifth wheel hitch such as the B&W Companion, which locks into the gooseneck ball hole or puck system. A pin box adapter on the trailer is the other route, but many RV makers do not approve it.

What is a factory puck system?
Ford, Ram, Chevy and GMC offer factory-installed mounting points in the bed, called pucks, for gooseneck and fifth wheel hitches. A puck-mount hitch bolts into those points with no drilling.

Do I need a slider hitch for a short bed?
Often, yes. On a short bed the front of the trailer can hit the cab in a tight turn. A slider moves the hitch back to make room.

What do rails and base rails do?
They bolt to the truck frame through the bed and give a rail-mount hitch head a solid place to pin in. Install kits add the frame brackets and hardware for your truck.