KT Performance » H&S Motorsports

Kit Includes-
1 - Brand New Bosch Modified 10mm CP3 Pump
1 - Billet CP3 Pump Adapter with O-Ring
1 - High Pressure Fuel Line
1 - Low Pressure Fuel Line
1 - Fuel Return Line Block-Off
1 - Hose, Clamps, Fittings, and other Hardware required for installation

This product may not work with the EGR cooler installed. It may need to be removed.
This product MUST be used in conjunction with custom tuning calibrations. Failure to install the correct calibrations can result in engine damage.
An aftermarket low pressure fuel system is recommended. AirDog and FASS are the two most commonly used.

Kit Includes-

1 - Brand New Bosch CP3 Pump
1 - Billet CP3 Pump Adapter with O-Ring
1 - High Pressure Fuel Line
1 - Low Pressure Fuel Line
1 - Fuel Return Line Block-Off
1 - Hose, Clamps, Fittings, and other Hardware required for installation

This product may not work with the EGR cooler installed. It may need to be removed.
This product MUST be used in conjunction with custom tuning calibrations. Failure to install the correct calibrations can result in engine damage.
An aftermarket low pressure fuel system is recommended. AirDog and FASS are the two most commonly used.

**AFTERMARKET ECM TUNING NOT REQUIRED.**

Kit Includes:-HSM Throttle Body adapter assembly
1-Stainless Steel Tubing
1-90 Deg. Silicone boot
1-Pack of Installation Hardware

Turbochargers not only produce pressure, but also generate heat in the process. Once the combination of heat and pressure exceeds what the plastic intercooler pipe can handle, it will fail catastrophically, which could potentially leave you stranded on the side of the road.

• Use of this product may damage or destroy mechanical and/or electrical components of this vehicle.
• Use of this product may void or nullify the vehicles factory warranty.
• User understands that motorsports are dangerous, and that installation of this product may subsequently require special driving skills or techniques to safely operate the vehicle.
• User assumes sole responsibility for the safe, proper, and legal use of the vehicle at all times.
• The purchaser and end user releases, indemnifies, discharges, and holds harmless KT Performance Inc and H&S Motorsports, LLC from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions. H&S Motorsports will not be liable for any direct, indirect, consequential, exemplary, punitive, statutory, or incidental damages or fines cause by the use or installation of this product.

Features:

• Metal Drain valve on the fuel filter.
• No more dealing with broken factory plastic drain valves and factory plastic fuel filter housings!
• No more messy fuel filter changes.
• Cheaper and much quicker fuel filter changes.
• High-quality, patent-pending HSM billet filter plate.
• High-quality hoses, fittings, and hardware.
• Fuel Filter/Water Separator.
• Easy kit installation.
• Made in the U.S.A!