Additional Images

SCT X4 Power Flash Programmer, Ford

7015
The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded performance or fuel economy tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle's OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the X4 programs your vehicle.



With a HUGE Backlit display, the SCT X4 Power Flash makes it EASY to read the Built-In Data Logging or Real Time Monitored Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source!

The X4 Power Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. Restoring your vehicle to the stock PCM program is as easy as selecting Return to Stock from the device menu.

X4 Ford Product Features:
-Increases Horsepower & Torque!
-Stores 10 Custom Tunes
-Full Color Backlit LCD Display
-High Speed Datalogging / Monitoring
-Reads/Clears DTC Trouble Codes
-Easy Restoration Back to Stock
-Dual Analog Inputs
-Most Popular Vehicles Supported
-Installs Quickly & Easily
-USB Interface Cable Included
-User Adjustable Vehicle Parameters
-Built-In Wifi for easy updates


***This product is not legal for sale or use in California on pollution controlled motor vehicles
Was: $499.00
Sale: $399.00
Save: 20%
Save: $100.00

Customize Your Item

- Choose a size: -
 * required
Qty:
Free Shipping!

Description

Pre-Loaded Tune File Adjustable Options (vary for each vehicle and are not available on all vehicles)

-Rear O2's Disabled
Disables the Rear O2s and eliminates CEL caused by rear O2 removal.

-Fuel Injectors
Allows you to adjust for different sized fuel injectors.

-CMCV Delete Plates
Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle.

-Speed Limiter
Allows you to Remove, Increase or Decrease the vehicles speed limiter.

-Idle Speed
Allows you to Increase or Decrease the vehicles idle speed.

-Traction Control
Allows you to disable the vehicles Traction Control without using the button in the vehicle.

-Spark Modification by RPM
Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)

-WOT Fuel
Allows you to Add or Remove Fuel at Wide Open Throttle.

-Shift Firmness Control
Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY

-Axle Ratio
Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle.

-Tire Size
Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle.

-Aftermarket Intake
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of
available intake kits.

-Stores Stock Tune
Stores a true copy of your vehicle's stock file before programming. Used for warranty repairs and unlocking the programmer.

-Supports Custom Tunes
Supports and holds custom tunes.

-Fan Control
Lowers the Temperature at which the Fan turns on.



Custom Tune File Adjustable Options

-Idle Speed
Allows you to Increase or Decrease the vehicles idle speed.

-Rev / RPM Limiter in Drive
Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Drive

-Rev / RPM Limiter Neutral
Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Neutral

-Speed Limiter
Allows you to Remove, Increase or Decrease the vehicles speed limiter.

-Fan Control
Lowers the Temperature at which the Fan turns on.

-WOT Fuel
Allows you to Add or Remove Fuel at Wide Open Throttle.

-Axle Ratio
Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle.

-Tire Size
Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle.

-WOT Shift Points by Gear
Allows you to Increase or Decrease the Wide Open Throttle Shift points of each gear individually.

-Shift Firmness Control
Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY

Details

  • 7015
  • 7015
  • SCT
  • New

Shipping Information

  • Item Requires Shipping
  • 1.0 lbs.
  • W9.0000” x H4.0000” x L12.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (1)

Great Programmer
  • Currently 5/5 Stars

Reviewed by: Payton09/01/2015 06:55PM

Product ownership: Less than 1 year

Purchased from: KT Performance

Comments:
Before I put this programmer on my truck it left a lot to be desired. After installing just the standard tune, I was extremely impressed. I could sit there and boil the tires if I felt like it.

You must login to post a review.