Additional Images

Ford Motorcraft HPOP STC Fitting Update Kit, Ford (2004.5-10) 6.0L Power Stroke Diesel (Also fits 4.5L Power Stroke)

4C3Z-9B246-F
The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is a New One-Piece High Pressure Oil Connector.

The installation of the Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is highly recommended when you're replacing your EGR cooler, installing a EGR delete or oil cooler. It is very highly recommended that you install the Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F anytime the pump is exposed during repairs.
By installing this Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F kit will restore engine reliability and customer satisfaction by eliminating repeat failures.

Always use this Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F to service STC fitting failures. Consider installing the Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F anytime you have an engine out or apart for repairs where the HPOP is accessible. This Ford 6.0 STC HPOP Fitting Update Kit is a recommended update for all 2004 to 2007 6.0L Power Strokes.

The old style fittings were prone to leaking causing hard start, low HPOP pressures and stalling when engine reaches normal operating temperature. These known issues are eliminated with the installation of the Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F.

*The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F contains the new bracket in a kit as shown in image.

The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is the redesign of the high pressure oil pump for 2005 and newer Power Stroke diesel engines. The "snap-to-connect" or STC fitting used to connect the high pressure oil pump to the oil supply branch tube has been problematic. The two piece fittings have a tendency to flex causing wear on the seal and the locking ring resulting in leaks and occasionally the complete separation of the fitting. When a leak occurs at this fitting, the engine may be difficult to start or may not start at all. Depending on the severity of the leak the engine may stall, sometimes abruptly and without warning.


The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is the most current version available to service failed Snap To Connect or Quick Connect fittings on 2005 through 2007 Ford and International trucks.

The included bracket is designed to support the fitting and branch tube and eliminate the possibility of the fitting to become separated.

The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F contains:
1 Support Bracket
1 Hydraulic Pump Seal Kit
1 Branch Tube Adapter - Male
1 HPOP Adapter Fitting - Female
2 M6 X 35 mm Branch Tube Bolts
2 M8 X 60 mm Pump Bolts
1 M8 X 45 mm Pump Bolt

Installing a the STC HPOP Fitting Update Kit fixes a weak link in the Ford 6.0L Power Stroke!
Was: $159.55
Sale: $114.45
Save: 28%
Save: $45.10
5 5 1

Qty:
Free Shipping

Description

The Ford STC HPOP Fitting Update Kit 4C3Z-9B246-F works on the following affected engines:
International VT-275,
International VT-375
Ford 4.5L Power Stroke
Ford 6.0L Power Stroke diesel engines.


The new connector is reported to be in production 4.5L and 6.0L Power Strokes for 2008 model year LCF trucks and Econoline along with the International VT-275 and the VT-365. The 6.0L Power Stroke diesel engine remains as an engine option for the 2008 Econoline. The Ford STC HPOP Fitting Update Kit 4C3Z-9B246-F fitting is installed in production engines starting from:
V8 engines: Engine ser# 431736 on 2/9/07.
V6 engines: Engine ser# 431705 on 2/8/07.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 0.8 lbs.
  • W6.0000” x H6.0000” x L6.0000”
  • Free Shipping

Documents

Customer Reviews

Comment Total Reviews (1)

HPOP
  • Currently 5/5 Stars

Reviewed by:

Product ownership: A year or longer

Purchased from: KT Performance

Comments:
parts looked great but were misplaced so they never got put on the truck

You must login to post a review.