Additional Images

Applied Performance Products Turbo, Dodge (2003-07) 5.9L Cummins, Stage 1

801-013

Performance Stock-Replacement Turbo for 03-07 Dodge Ram 5.9L Cummins

The Applied Performance Products upgraded direct-bolt-on turbo is constructed of extremely high quality A-356 aluminum. We use a ported-shroud style compressor housing and a lightweight, high strength alloy, BILLET CNC compressor wheel that all work together to eliminate annoying turbo bark and compressor surge. This turbo utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation. The turbo is equipped with a 59mm inducer and an 80mm exducer which, when combined with the lightweight billet CNC wheel, results in reduced turbo lag and maximum performance and power. These performance upgrade turbos are equipped with a billet aluminum heavy duty adjustable wastegate actuator pre-set at 36psig. The wastegate actuator is a quick-adjust design which eliminates the need to disconnect the actuator from the wastegate valve. New gaskets and hardware are included for a no-leak install.

To keep the bark and surge issues under control we have designed this turbo from the groud up to take advantage of the lighter, stronger, billet CNC compressor wheel. For trouble-free operation, the traditional turbine oil seal has been replaced with a step-gap oil seal to minimize oil-burning and build-up on the turbine wheel. Our turbos out-perform the competition with faster spooling, lower EGT's, Higher Max HP Supported, a Step-Gap Oil Seal, a Billet CNC Compressor Wheel with Extended Tip Technology, and much tighter quality control... and no nagging Bark/Surge problem!

Features

  • 5 Year Warranty!!!
  • Billet CNC Compressor Wheel
  • Extended Tip Compressor Wheel Technology
  • Step Gap Oil Seal on Turbine Side
  • Quick-Set Wastegate Actuator

Secifications

  • Compressor Inducer - 59mm
  • Compressor Exducer - 80mm
  • Exhaust A/R - 0.84
  • Adjustable Wastegate Pre-Set - 36 psig
  • Extended Tip Compressor Wheel
  • Manufactured by Applied Performance Products USA

Benefits

  • Direct Replacement for OE Turbocharger
  • Reduced EGT's
  • Spools Faster than OE Turbo

IMPORTANT EMISSIONS NOTE: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use

Pricing: $1,495.00

Customize Your Item

- Choose a size: -
 * required
Qty:
Free Shipping!

Description

Applied Performance Products OE replacement turbocharger was developed as a true stock replacement turbocharger. This 59/74 turbocharger comes equipped with a 59/80mm billet CNC compressor wheel, 74/64mm turbine wheel,and 0.84 A/R exhaust housing. The billet aluminum CNC wastegate is a quick-adjust design and is set to 36 psig. Included with the turbocharger is a ductile iron exhaust elbow and v-band clamp to connect to the factory downpipe. All necessary mounting hardware and gaskets are included. Additional fueling is not required, but it is recommended to take advantage to the additional airflow supplied by this turbocharger. Full benefits of this turbocharger such as reduced EGT's and quicker spooling will be obtained with the addition of a performance air intake system and exhaust system.

Warranty Info:
-5 years
-manufacturer defects
-non-transferrable
-original purchaser only

Details

Shipping Information

  • Item Requires Shipping
  • 35.0 lbs.
  • W14.0000” x H14.0000” x L14.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.