Additional Images

Archoil AR9100 Friction Modifier Oil Additive 8oz

AR9100-8
AR9100-8oz treats 7.25 Quarts of Engine Oil, 2.5 Quarts of Gear Oil, or 4 Gallons of Automatic Transmission Fluid

AR9100 main purpose of is to reduce friction and wear; extend component life; and to dissipate frictional heat.

AR9100 surface friction coefficient tests at 0.037. It is dramatically more lubricious than traditional lubrication oils, and it is capable of bearing loads many times that of other solid boundary lubricants.

    FEATURES / BENEFITS:
  • Reduces surface friction 60-80%
  • Reduces operating energy requirements / increases fuel efficiency
  • Increases horsepower
  • Reduces fluid system wear by
  • Minimizes fluid oxidation- extends the oil drain cycle / reduces downtime
  • Reduces operating temperatures up to 30%
  • Inhibits corrosion
  • Extreme Pressure agent -absorbs shock loads of up to 4000 lbs
  • Cleans out pre-existing carbon and varnish build up
  • Reduces emissions
  • Guaranteed to remain in the oil and not get caught up in filtration system.
  • Will not agglomerate/get caught in filters like boric acid based boron lubricants.
  • Readily biodegradable (85% degradable in 28 days), and non-toxic
  • Install at each oil change

AR9100 is highly concentrated. Dilute in standard lubrication oil as directed for the specific application

Friction Modifier treat rate for engines is 3.5% or 1.1oz to 1 quart

Add at each oil change and it will last entire time from 3,000 miles or 25,000 miles.
Pricing: $24.95
Qty:

Description

AR9100 Nanoborate reduces friction to coefficients of 0.037, half again the friction coefficient of 'micro boron', and a fraction of traditional lubricants like zinc, phosphorous and other additives presently used in popular oil and grease formulations.

AR9100 also has several times the load capacity of both 'micro boron' and far more than traditional chemistries, testing at up to 4000 lbs. on the Falex Pin & Vee Block test.

AR9100 is introduced into the oil and disperses exciting the molecules in the oil, turning it into an extremely efficient high performance lubricant. Friction and wear are reduced at rates nearing 75%.

AR9100 greatly exceeds the challenges presented by today’s tightened fluid system tolerances.

AR9100 Significant reductions in friction also has the highly desirable side effect of increasing the system's fuel efficiency.

AR9100 Nanoborate lubrication reduces the amount of energy required to operate the system.

Shipping Information

  • Item Requires Shipping
  • 0.2 lbs.
  • W5.0000” x H5.0000” x L5.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.